New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Make softkey Page button for 3CX (v12)
Author Message
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #5
RE: Make softkey Page button for 3CX (v12)
here is part of my 3cx yealinkt3x.ph.xml file

################################################################################​#######
## Multicast ##
################################################################################​#######

#Configure the codec of multicast paging.
multicast.codec =

#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable =

#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority =

#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address = 224.0.0.32:10000

#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label = Office Page


then under the programmable keys I changed the third key to be paging.

programablekey.3.type =13
programablekey.3.line =
programablekey.3.value = 8001
programablekey.3.xml_phonebook =
programablekey.3.history_type =
programablekey.3.label = Paging



8001 is the extention that my 3cx system uses. you could also just use the yealink multicast paging, not sure how that works.
01-03-2014 03:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Make softkey Page button for 3CX (v12) - jasit - 01-03-2014 03:25 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Make Time and Date Larger zachtate 2 4,075 07-25-2015 04:04 AM
Last Post: zachtate
  T32 - Message Button Not Functional When Handset Off Hook kg4ysy 2 5,583 03-07-2014 12:07 AM
Last Post: EarlGrei

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication