[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Make softkey Page button for 3CX (v12)
Author Message
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #5
RE: Make softkey Page button for 3CX (v12)
here is part of my 3cx yealinkt3x.ph.xml file

################################################################################​#######
## Multicast ##
################################################################################​#######

#Configure the codec of multicast paging.
multicast.codec =

#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable =

#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority =

#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address = 224.0.0.32:10000

#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label = Office Page


then under the programmable keys I changed the third key to be paging.

programablekey.3.type =13
programablekey.3.line =
programablekey.3.value = 8001
programablekey.3.xml_phonebook =
programablekey.3.history_type =
programablekey.3.label = Paging



8001 is the extention that my 3cx system uses. you could also just use the yealink multicast paging, not sure how that works.
01-03-2014 03:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Make softkey Page button for 3CX (v12) - jasit - 01-03-2014 03:25 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Make Time and Date Larger zachtate 2 10,674 07-25-2015 04:04 AM
Last Post: zachtate
  T32 - Message Button Not Functional When Handset Off Hook kg4ysy 2 9,811 03-07-2014 12:07 AM
Last Post: EarlGrei

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication