T-38 autoprovision

[jasit]

I also changed my backlight level, not sure if that is required but, it might help.


#Configure the active backlight level. It ranges from 1 to 10, the default value is 2.
#The same level for different phones may result in different backlight intensities.
#The backlight level of T2xP ranges from 1 to 3.
phone_setting.active_backlight_level = 7

#Configure the inactive backlight level. It ranges from 1 to 10, the default value is 1.
phone_setting.inactive_backlight_level = 7

#Configure the backlight time (in seconds). The valid values are: 1-Always on, 60 (default), 120, 300, 600, 1800.
phone_setting.backlight_time = 1

#Configure the phone background.
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png
{IF model=Yealink T32}
phone_setting.backgrounds = Config:yealinkt32.png
{ENDIF}

{IF model=Yealink T38}
phone_setting.backgrounds = Config:yealinkt38.png
{ENDIF}

#Configure the screen saver time (in seconds). The valid values are 1, 60 (default), 120, 300, 600, 1800.
phone_setting.screen_saver_time = 0