How to add remote phonebook to dialing list via provisioning file

[Karl_Yealink]

(10-23-2015 10:03 PM)engine411 Wrote:  

(10-23-2015 07:47 PM)Yealink_Karl Wrote:  I had test in latest firmware, and there is the result:
When you want to dial a contact, press the deirctory then choose the phonebook, and you can see the all contacts, if you want to search one contact, you need to press the search and input the name. If you don't press the search, and press the any number button, it will show URL is empty. So you can upgrade the T46 to the latest firmware, you can download the firmware from the link: http://support.yealink.com/attachmentDow...0.0.70.zip

I don't see any of this. Not sure what you're referring to.

Replay: Can't you see it? Do you upgrade to the 28.80.0.70? I had test in this latest firmware. Do you see search in the bottom of the interface, when you press the button, you can't see any contacts, but when you input any number, you will see the contact. Please test again, if you can't see again, please screencapture for us.

Quote:And if you want to add remote phonebook via auto provisioning, you can use the syntax: remote_phonebook.data.X.url=
and the x range from 1 to 5.

I will try this. But this only tells the phone where this phonebook is - what should I put in the provisioning file to tell the phone to use this source in the dial list?

Replay: When go to dial interface, you will see the direcotry in the botton of the screen, only press the button, and you can select the contact you want to call, please test again.

Quote:For your last suggestion, if the phone copy the remote phonebook in themselves, it will take up memory. It can work, but consider the memory of remote phonebook, if some phonebook have large memory, and it beyond the memory of the phone. It's hard for us to solve the problem, so we can change the method of update the phonebook.

Understood, but for phones that can use it, it would make all this quite a bit easier. There are other options in the provisioning file that specify that they're only valid for some specific models. I think this could be the same - only supported for T46G and above, for example.

Replay: For this question, I think I need to double check with our R&D then give you respond.

Thanks!