[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using VLANs
Author Message
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: Using VLANs
HI

Thanks for your information, for the VLAN , yes, in your situation , PC's traffic will be tagged, and the voice will be untagged.

The purpose of VLAN configurations on the IP phone is to insert tag with VLAN
information to the packets generated by the IP phone. When VLAN is properly
configured for the ports (Internet port and PC port) on the IP phone, the IP phone will tag
all packets from these ports with the VLAN ID. The switch receives and forwards the
tagged packets to the corresponding VLAN according to the VLAN ID in the tag as
described in IEEE Std 802.3.
VLAN on IP phones allows simultaneous access for a regular PC. This feature allows a PC
to be daisy chained to an IP phone and the connection for both PC and IP phone to be
trunked through the same physical Ethernet cable.

for more details, please refer to the admin guide download from below link , page 560:

http://support.yealink.com/attachmentDow...V80_60.pdf

TKS & BR

Michael
10-21-2015 06:06 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Using VLANs - lonvoice - 10-21-2015, 12:23 AM
RE: Using VLANs - Yealink_Michael - 10-21-2015 06:06 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication