[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T38G - Softkey autoprovision not working (Remote Phone Book)
Author Message
SL2013 Offline
Junior Member
**

Posts: 21
Joined: Nov 2013
Reputation: 1
Post: #1
T38G - Softkey autoprovision not working (Remote Phone Book)
I have two questions:

1.
We have a lot of T38G phones and it is very important for us to use the remote phone book if we want to transfer a phone call.
So I want to add the remote phone book to a softkey at the call state 'Transfer To'. Is that possible? I can't find an autoprovision line (like 'custom_softkey_call_failed.url') for Transfer To. What is te correct line for Transfer To?

2. I want to test with autoprovision for the softkeys. So I have the following XML file (CallFailed.XML) and this file contains the following code (I found this in some examples):
Code:
<CallFailed>
<Disable>
<Key Type="Empty"/>
<Key Type="Switch"/>
</Disable>
<Enable>
<Key Type="NewCall"/>
<Key Type="Empty"/>
<Key Type="Empty"/>
<Key Type="Cancel"/>
</Enable>
<Default>
<Key Type="NewCall"/>
<Key Type="Empty"/>
<Key Type="Empty"/>
<Key Type="Cancel"/>
</Default>
</CallFailed>

My y000000000038.cfg contains the following line:
custom_softkey_call_failed.url = http://www.myurl.com/CallFailed.XML
Before autoprovision we have the following situation:
[Image: Picture1.png]
After the autoprovision we have this situation:
[Image: Picture2.png]
It happens at all the Call States I tried.

I can't find what is going wrong. The current software version on the phone is 38.70.0.180, we have also this problem on the 38.70.0.125 and 38.70.0.105

Can you tell me how to configure (question1) and what is going wrong (question 2)? Thank you in advance.
(This post was last modified: 12-12-2013 02:16 PM by Yealink Support.)
12-03-2013 04:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T38G - Softkey autoprovision not working (Remote Phone Book) - SL2013 - 12-03-2013 04:51 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T57W will not factory reset to autoprovision! bill@wesimplifyit.com 1 418 11-08-2024 08:36 PM
Last Post: complex1
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 1,909 05-21-2024 01:23 PM
Last Post: rlaager
  Auto Provision Wall Paper Stopped Working TRP Tech 5 12,153 02-19-2024 12:02 AM
Last Post: jamesalan
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 2,976 10-12-2023 05:49 PM
Last Post: Andi_Dee
  Remote Phonebook settings lost.. bluetba 0 1,977 02-23-2023 07:52 PM
Last Post: bluetba
  RPS not working for T41P T42G andrew.manning 0 2,301 02-17-2023 06:29 PM
Last Post: andrew.manning
  Yealink T54W Auto Provision not working h.cmc 1 5,498 12-09-2022 08:31 PM
Last Post: complex1
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 7,110 08-30-2022 06:28 PM
Last Post: complex1
  Setting of lang.gui via remote provisioning cloudaware 1 5,474 10-26-2021 07:11 PM
Last Post: cloudaware
  Action url variable $cfg_all not working on Yealink T57W Ivan86 1 7,946 03-19-2021 03:07 PM
Last Post: Ivan86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication