[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Two phones answer when one phone answers
Author Message
jholcombe Offline
Junior Member
**

Posts: 22
Joined: Jul 2014
Reputation: 0
Post: #1
Two phones answer when one phone answers
Two extensions 721 and 722 are members of "Ring All" ring group 951. Two virtual extensions 90001 and 90002 in a Patton PSTN gateway are set to connect inbound calls to ring group 951. Custom parameter ALLOWUSEBUSYOPTFORGROUP is set to 1, because the phones need to ring even if the the secretary is already on a call.

Last night I upgraded from 3CX 12.5 to 14. In the process I also upgrade the firmware on all of our Yealink T46G phones to the included 28.73.0.50 firmware.

Now if both virtual extensions 90001 and 90002 have an inbound call and the secretary on xt 721 answers a call, extension 722 also answers the same call on speakerphone, even if no-one is sitting at the desk for xt 722. It is essentially a 3-way call between the inbound caller, xt 721, and xt 722. What would cause 722 to answer the call? 722 answers the call at the exact same time that 721 does. Both phones stop ringing at that point, even though there is still another inbound caller on the other line, and ALLOWUSEBUSYOPTFORGROUP is set to 1. I don't believe we had this problem until after upgrading to 3CX v 14 and upgrading the firmware on the T46G phones.

I'm not sure if it's a 3CX issue, a Yealink issue, or both. I looked over the 3CX logs and I can't find anything obvious, but if anyone else wants to look them over please be my guest! I really need to get this resolved quickly as a deadline (for me) is approaching to have this functional and, for the most part, bug free. The log below is grouped by call #.

06-Oct-2015 19:47:01.313 Leg L:74.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:01.313 [CM503008]: Call(C:74): Call is terminated
06-Oct-2015 19:47:01.309 Leg L:74.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:46:48.846 Leg L:74.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.844 [CM503003]: Call(C:74): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:46:48.731 [CM503007]: Call(C:74): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:46:48.730 [CM503007]: Call(C:74): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:46:48.728 L:74.3[Extn:721] has joined to L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.551 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.547 [CM503025]: Call(C:74): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:74.1[Line:90002<<anonymous]
06-Oct-2015 19:46:16.501 [CM503027]: Call(C:74): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.501 [CM503004]: Call(C:74): Route 1: from L:74.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:16.500 [CM503001]: Call(C:74): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:47:03.645 Leg L:75.1[Line:90001<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:47:03.644 [CM503008]: Call(C:75): Call is terminated
06-Oct-2015 19:47:03.640 Leg L:75.2[Extn:722] is terminated: Cause: BYE from 10.102.100.9:5062
06-Oct-2015 19:46:49.837 Leg L:75.3[Extn:721] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.835 [CM503003]: Call(C:75): Call to <sip:721@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.8:5062
06-Oct-2015 19:46:49.715 [CM503007]: Call(C:75): Extn:722 has joined, contact <sip:722@10.102.100.9:5062>
06-Oct-2015 19:46:49.713 [CM503007]: Call(C:75): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:46:49.711 L:75.2[Extn:722] has joined to L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.575 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.571 [CM503025]: Call(C:75): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:75.1[Line:90001<<anonymous]
06-Oct-2015 19:46:45.526 [CM503027]: Call(C:75): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.526 [CM503004]: Call(C:75): Route 1: from L:75.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:46:45.524 [CM503001]: Call(C:75): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:16.786 Leg L:76.3[Extn:721] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:16.785 [CM503008]: Call(C:76): Call is terminated
06-Oct-2015 19:48:16.782 Leg L:76.1[Line:90001<<anonymous] is terminated: Cause: BYE from 10.102.70.1:5060
06-Oct-2015 19:47:33.099 Leg L:76.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.098 [CM503003]: Call(C:76): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:47:33.076 [CM503007]: Call(C:76): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:47:33.075 [CM503007]: Call(C:76): Line:90001<<anonymous has joined, contact <sip:90001@10.102.70.1:5060>
06-Oct-2015 19:47:33.072 L:76.3[Extn:721] has joined to L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.522 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.518 [CM503025]: Call(C:76): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:76.1[Line:90001<<anonymous]
06-Oct-2015 19:47:27.473 [CM503027]: Call(C:76): From: Line:90001<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.473 [CM503004]: Call(C:76): Route 1: from L:76.1[Line:90001<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:27.471 [CM503001]: Call(C:76): Incoming call from Line:90001<<anonymous to <sip:951@10.102.10.1:5060>

06-Oct-2015 19:48:20.486 Leg L:77.1[Line:90002<<anonymous] is terminated: Cause: BYE from PBX
06-Oct-2015 19:48:20.486 [CM503008]: Call(C:77): Call is terminated
06-Oct-2015 19:48:20.485 Leg L:77.3[Extn:721] is terminated: Cause: BYE from 10.102.100.8:5062
06-Oct-2015 19:48:01.458 Leg L:77.2[Extn:722] is terminated: Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.457 [CM503003]: Call(C:77): Call to <sip:722@10.102.10.1:5060> has failed; Cause: 487 Request Terminated/INVITE from 10.102.100.9:5062
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Extn:721 has joined, contact <sip:721@10.102.100.8:5062>
06-Oct-2015 19:48:01.346 [CM503007]: Call(C:77): Line:90002<<anonymous has joined, contact <sip:90002@10.102.70.1:5061>
06-Oct-2015 19:48:01.344 L:77.3[Extn:721] has joined to L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.530 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.527 [CM503025]: Call(C:77): Calling T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062] for L:77.1[Line:90002<<anonymous]
06-Oct-2015 19:47:46.482 [CM503027]: Call(C:77): From: Line:90002<<anonymous (<sip:anonymous@3cx.somewhere.gov:5060>) to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.482 [CM503004]: Call(C:77): Route 1: from L:77.1[Line:90002<<anonymous] to T:RingAll:951@[Dev:sip:722@10.102.100.9:5062,Dev:sip:721@10.102.100.8:5062]
06-Oct-2015 19:47:46.480 [CM503001]: Call(C:77): Incoming call from Line:90002<<anonymous to <sip:951@10.102.10.1:5060>


Any help or advice is greatly appreciated. Thank you!,

--John
10-07-2015 02:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Two phones answer when one phone answers - jholcombe - 10-07-2015 02:44 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Are legacy phones a security risk? Tinov 2 1,627 01-22-2022 07:41 PM
Last Post: Amelie Davis
  Yealink Phones and CVE-2021-44228 DaveNL 0 513 12-15-2021 02:41 PM
Last Post: DaveNL
  integrate Salesforce CRM to Yealink phones mehdi.ett 2 6,610 11-08-2021 02:28 PM
Last Post: JessicaWade
  Phones no longer support Let Encrypt johnbeaumont 19 7,229 10-14-2021 05:32 PM
Last Post: yealink@vespino.nl
  Visitor preview before picking up the phone T58 dermosko 0 890 10-01-2021 11:41 AM
Last Post: dermosko
  Questions about the new MP58 phone jaseinatl 4 3,521 09-03-2021 01:09 AM
Last Post: ystrooba
Question why phone send gateway ip detect packet pig_tails 1 2,033 06-04-2021 08:38 PM
Last Post: KaithlynMoore
  List of service providers for YeaLink phones jaseinatl 1 2,408 03-30-2021 05:16 AM
Last Post: guru@ezeetel.com
Question Show "called line" on phone? Voodoopupp 2 2,672 02-25-2021 04:17 PM
Last Post: Voodoopupp
  Audio problems on phones (t23g i t42s) bob_1921 2 3,171 12-02-2020 04:46 AM
Last Post: bob_1921

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication