New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Provisioning multicast settings – T42G
Author Message
newvistech Offline
Junior Member
**

Posts: 3
Joined: Oct 2013
Reputation: 0
Post: #1
Provisioning multicast settings – T42G
I am attempting to use the Multicast settings in the provisioning template to configure multicast paging on a large number of T42G phones. The phones are running the 29.71.0.112 firmware. I have entered the desired settings into the template and reprovisioned the phones, but the settings are not being applied. It is though that entire section of the template is being passed over. I have several other modifications within the template that are all being applied without issue, but none of the multicast settings are getting pushed out.

Here is the section from the template with my modifications:
################################################################################​#######
## Multicast ##


################################################################################​#######
#Configure the codec of multicast paging.
multicast.codec = PCMU

#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable = 0

#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority = 0

#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address = 224.0.0.1:50001
multicast.listen_address.2.ip_address = 224.0.0.1:50002

#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label = Page 1
multicast.listen_address.2.label = Page 2

################################################################################​​#######

Am I missing something? Is there another setting, or something that needs to be done beyond this for the multicast section to work properly?

Thanks.

UPDATE: There is another file involved in provisioning these phones: y000000000029.cfg, and that file also contains the multicast section. I don't fully understand the relationship between the files, but apparently this file either takes priority or gets applied after the phone's template file. Once I edited the multicast settings in this file, everything worked as expected.
(This post was last modified: 11-13-2013 11:45 PM by newvistech.)
11-13-2013 11:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Provisioning multicast settings – T42G - newvistech - 11-13-2013 11:01 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Custom DECT Settings crew.di 4 207 11-08-2019 02:47 PM
Last Post: crew.di
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 1,758 07-02-2019 03:04 PM
Last Post: Fraukas2
  Provisioning Multiple Wallpapers BryanLee 1 1,095 04-24-2019 08:39 PM
Last Post: joew
  T23G won't donwload y000000000044.cfg from Provisioning Server rsardinha 3 1,113 04-12-2019 06:13 PM
Last Post: rsardinha
  Firewall Settings for Auto Provisioning ChristophWHAT 2 1,631 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Multiple provisioning servers Integra Business Solutions Inc. 4 1,911 10-26-2018 06:49 PM
Last Post: Integra Business Solutions Inc.
  Auto Provisioning Hangs Rus 1 1,331 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 1,620 10-12-2018 02:56 PM
Last Post: jolouis
Question Autoprovisioned settings reverting to defaults after a period of time Inline Computer Support 1 1,651 02-05-2018 09:58 AM
Last Post: Kevin_Yealink
  T48G and others - power saving settings Renke 0 1,061 01-11-2018 07:41 AM
Last Post: Renke

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication