CP960 Not Booting

[20chakar]

(04-07-2020 07:01 PM)NezarH Wrote:  

(04-07-2020 10:11 AM)robert110 Wrote:  I encountered the same problem here. After an incomplete upgrade, I could not let the CP960 boot, and now that I am trying to use recovery mode, I tried the method for the attached image, but if I ask, it does work not; What does the firmware update for "USB flash disk" mean? ? Is it possible? What should I do, I would appreciate it. I was listening to someone say English essay help in this method, so what's your opinion.

Finally Good News!

Yealink reply to me previous ticket and sent me link contain Recovery mode process on CP960 (plus other model, seems updated version!) the most important they sent me new files CP960.bin and CP960.rfs which were the main reason for the recovery mode to work this time!

it's working now .

the process :

1- prepear formated usb flash (FAT32)
2-copy the needed files (CP960.bin and CP960.rfs and the CP960.rom) (I have used what yealink tech. sent me) to the flash drive.
3-plug the USB flash drive next to the micro usb
4-switch on the CP960
5-press Home (the circle) when you see "initializing" keep press until you see another screen which will do the recovery automatically ! cant be easier than this .

Thats it .

BIG THANKS TO MongoTEL_Support , and Thank you Yealink Technical Support team.

you saved us!

Thank you for the above message, had same similar issue, I was android version of which I NEEDED TO upgrade the android version to a higher, eventually I mistakenly upgraded to MS Team.

I followed up the above process with download ROM file ( CP960-73.86.0.20 and CP960-73.80.0.25) still showing to import MS team license but in French format.
How do I go about this