[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Configure Yealink Phones autoprov and Action URLS on demand
Author Message
adeo Offline
Junior Member
**

Posts: 1
Joined: Apr 2021
Reputation: 0
Post: #1
Configure Yealink Phones autoprov and Action URLS on demand
Hi There,
i have programmed a software to use the action URLs.

The problem are the Client Desktops that usese DHCP (Laptops).
They changes often the IP-Adresses, so i have to change the IP-Adress in the actionurls to the Client.

My Question:
Is there a way to set the Action URLS from my Clientsoftware ?

the Provisioning of the Phones comes from the PBX, but the ActionURLS are set from me for every phone.

My software knows the IP-Adress of the Phone and the IP-Adress of the Client PC.
Now i will set the Actionurls on every start of the Program.

Any Ideas ?

Remark:
i had found in the Adminguide this :

http://admin:admin@192.168.200.158/servlet?phonecfg=set[&account.1.enable=1][&features.dnd.enable=1]

With that, i tried to set the ActionURLs, but there is no change and i get a cfg with only the Firmware-Version as response.



Cheers
Andreas
(This post was last modified: 08-14-2021 02:32 PM by adeo.)
08-13-2021 09:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Configure Yealink Phones autoprov and Action URLS on demand - adeo - 08-13-2021 09:41 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Automatically Configure Screen Saver MP56 nthoman@bmic.com 0 639 10-20-2023 03:44 AM
Last Post: nthoman@bmic.com
  OpenVPN AutoProv GiTech-MG 0 702 09-13-2023 06:38 PM
Last Post: GiTech-MG
  Encryption utility for MP56 phones rtrefz 0 1,250 01-23-2023 10:15 PM
Last Post: rtrefz
  Yealink T54W Auto Provision not working h.cmc 1 3,543 12-09-2022 08:31 PM
Last Post: complex1
  Yealink Manufacturing CA IFM Ltd 0 2,153 05-27-2022 08:00 AM
Last Post: IFM Ltd
  Yealink T54W - disable wifi from template itops@vivcourt.com 2 5,210 01-25-2022 10:32 AM
Last Post: itops@vivcourt.com
  Yealink CA certificate IgorG 2 9,119 06-11-2021 02:23 PM
Last Post: smuser
  Action url variable $cfg_all not working on Yealink T57W Ivan86 1 6,380 03-19-2021 03:07 PM
Last Post: Ivan86
  T4xx phones, load additional configuration after start possible? DanH 0 3,543 04-03-2020 04:02 PM
Last Post: DanH
  Push.xml to setup action urls via YealinkIPPhoneConfiguration? nSolvePaul 0 3,761 01-22-2020 01:47 PM
Last Post: nSolvePaul

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication