[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46S couple line on hold
Author Message
sprintership Offline
Junior Member
**

Posts: 8
Joined: Jan 2019
Reputation: 0
Post: #3
RE: T46S couple line on hold
(11-21-2019 04:50 PM)Fraukas2 Wrote:  Hello,

Easier method that I'm currently using is placing DSS keys as Line type.

For example, place the linekeys 1 to 4 with the Type as Line.
Press the line key 1 and call someone, then press the line key 2 to call someone else, this will automatically put the 1st call on hold. Then press the line key 3 to call another person, this will automatically put the 2nd call on hold, etc.
When all calls are on hold, or if you hung up with a line, simply press the line key to resume the call with that person.

Auto provision code:
Code:
linekey.1.line = 1
linekey.1.type = 15
linekey.1.value = 0
linekey.2.line = 1
linekey.2.type = 15
linekey.2.value = 0
linekey.3.line = 1
linekey.3.type = 15
linekey.3.value = 0
linekey.4.line = 1
linekey.4.type = 15
linekey.4.value = 0

Let me know how it goes.

Frank

hmmm this is all fine will this work with inbound calls? I wish I can use multiple lines using one extension like in Polycom

(11-22-2019 10:56 PM)sprintership Wrote:  
(11-21-2019 04:50 PM)Fraukas2 Wrote:  Hello,

Easier method that I'm currently using is placing DSS keys as Line type.

For example, place the linekeys 1 to 4 with the Type as Line.
Press the line key 1 and call someone, then press the line key 2 to call someone else, this will automatically put the 1st call on hold. Then press the line key 3 to call another person, this will automatically put the 2nd call on hold, etc.
When all calls are on hold, or if you hung up with a line, simply press the line key to resume the call with that person.

Auto provision code:
Code:
linekey.1.line = 1
linekey.1.type = 15
linekey.1.value = 0
linekey.2.line = 1
linekey.2.type = 15
linekey.2.value = 0
linekey.3.line = 1
linekey.3.type = 15
linekey.3.value = 0
linekey.4.line = 1
linekey.4.type = 15
linekey.4.value = 0

Let me know how it goes.

Frank

hmmm this is all fine will this work with inbound calls? I wish I can use multiple lines using one extension like in Polycom


dang it I tested and it works for inbound and outbound !!!!!!!!!!! you are the mam - Thank you
(This post was last modified: 11-22-2019 11:03 PM by sprintership.)
11-22-2019 10:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46S couple line on hold - sprintership - 11-21-2019, 01:43 AM
RE: T46S couple line on hold - Fraukas2 - 11-21-2019, 04:50 PM
RE: T46S couple line on hold - sprintership - 11-22-2019 10:56 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T27G Line Key BLFs Flash During Ring All Infonetx 0 139 02-17-2020 06:53 PM
Last Post: Infonetx
  T46S multiple line - on hold issue sprintership 1 368 01-07-2020 05:19 PM
Last Post: MongoTEL_Support
  T46G - Disable Line Key Configuration ? timalex 13 18,776 04-12-2019 09:23 AM
Last Post: Johnny88
  T46S Factory Default OK button does not work dkirk 0 1,211 02-06-2019 02:09 PM
Last Post: dkirk
  T46S Multicast from FreePBX Mike742 1 1,639 04-06-2018 08:11 PM
Last Post: jolouis
Exclamation Inbound calls from SIP trunk are muted until hold/un-hold pressed (plus Vtalk alert!) rkroes 3 5,201 07-08-2015 06:52 AM
Last Post: rkroes
  Line Key ICON Question rjhartman68 4 4,468 05-08-2015 11:25 PM
Last Post: rjhartman68
  T38P Phones Not Hold/Resume while in Call exuberocity 2 4,058 04-23-2015 01:43 AM
Last Post: exuberocity
  W52 Multi-Line Transfer jtesdall@mapcon.com 5 6,887 10-23-2014 09:47 AM
Last Post: Yealink_Jim
  Shared Line Axion Communications 3 6,521 01-11-2014 11:51 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication