Yealink T46s Park button

[BobBluePackets]

If you use a single line key on the Yealink (e.g. no expansion console), you should use the line key with
Transfer as the type, Label of Park and 70 as your value (assuming that you have stayed with the standard parking lot of 70.

This has worked for quite a while with no issues across a number of FreePBX versions.

If you have an expansion console, you also have the can also setup several line keys on here to park it directly onto a Parking Slot e.g. drop the call onto 71 or 72 or etc....and the LED show red to indicate a parked call on that slot (or show the slot it is parked on when using the park 70 key.

Is this not working for you???

Regards

Bob