(12-27-2017 01:52 AM)Samuel_Yealink Wrote: Dear User,
Firstly, the BLF-LED-Mode is not applicable to T48G/t48S because they don't have the hardware linekey.
Also I not very clear about the scenario that you are talking about, do you mean something like below?
1. You set a BLF to monitor A on the phone.
2. When A is talking you can see A's talking status.
3. B is Calling A when A is still on talking, then you see A's status is ringing, not talking, am I right?
If this is the case, then I don't see anything wrong, the status of A is correct all the time.
Please correct me if any misunderstanding.
Kind Regards
Samuel Wang
Using this scenario, what is wrong is user C who covers answering calls for user A can now not tell if user A is on the phone or not and does not know if they should answer the call or not.
(04-04-2018 07:23 PM)joshua@itstel.com Wrote: (12-27-2017 01:52 AM)Samuel_Yealink Wrote: Dear User,
Firstly, the BLF-LED-Mode is not applicable to T48G/t48S because they don't have the hardware linekey.
Also I not very clear about the scenario that you are talking about, do you mean something like below?
1. You set a BLF to monitor A on the phone.
2. When A is talking you can see A's talking status.
3. B is Calling A when A is still on talking, then you see A's status is ringing, not talking, am I right?
If this is the case, then I don't see anything wrong, the status of A is correct all the time.
Please correct me if any misunderstanding.
Kind Regards
Samuel Wang
Using this scenario, what is wrong is user C who covers answering calls for user A can now not tell if user A is on the phone or not and does not know if they should answer the call or not.
Ideally, the BLF talking status should override the BLF ringing status. The talking status is more informative than the ringing status.
Is there a way to accomplish this now? If not, please submit to development. Traditional phone systems worked this way - the talking status always over-road the ringing status BLF. I makes little sense to switch the BLF status to ringing when it is already displaying the talking status.
Hope this clarifies the original request. Thanks for the great support!