[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Always Forwarding with Firmware 28.82.0.20 is changed
Author Message
Aishion_Yealink Offline
Administrator
*******

Posts: 116
Joined: Mar 2017
Reputation: 1
Post: #5
RE: Always Forwarding with Firmware 28.82.0.20 is changed
(12-11-2017 04:41 PM)jacobj Wrote:  Hallo Aishion,

thank you for your reply.

It is no problem to activate the forwarding manually with code *8+Number and deactivating with *80.

For forward always in the yealink gui I can not use the off code beacause the phone calls *80+Number after deactivating. Before the last firmwareupdate it just used *80 only.

Regards,
Jacob

Hi Jacob,

Thanks for your prompt reply.

I know your issue well at present. Do you mean you set a Forward Dss key and configure target number in Value filed as well?

I just test on my side on both V81.0.110 and V82.0.20 version, and I found out if I don't set Value filed and left it blank, it will works well.

If I also set Target number on Value filed, it will disable Forward feature normally, so would you please kindly just leave Value fild to blank and test again?

Or if the issue still exist, could you please kindly help us gather the config.bin file, level 6 syslog and trace that we can debug?About how to get these files, please refer below FAQ:

http://support.yealink.com/faq/faqInfo?id=313

Please also kindly share us how many phones on your side.

If any question, please feel free to contact us.

Best Regards
Aishion
12-13-2017 05:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Always Forwarding with Firmware 28.82.0.20 is changed - Aishion_Yealink - 12-13-2017 05:32 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  documentation and firmware T43u jmooo 0 78 02-18-2021 02:23 AM
Last Post: jmooo
  Avoid Firmware V85 at all costs! lukeescude 0 131 02-13-2021 12:06 AM
Last Post: lukeescude
Bug Yealink T46G wont turn on after firmware update mike702 1 199 02-02-2021 08:21 PM
Last Post: complex1
  Cannot Downgrade Yealink SIP-T43U firmware YeaVictor 1 773 12-17-2020 01:12 AM
Last Post: YeaVictor
  Yealink T46s SFB Firmware change to T46s mhassi 1 832 12-01-2020 12:54 AM
Last Post: Yisroel_MongoTEL
  Current Firmware T49G? Joseph1823 2 2,174 11-10-2020 05:59 PM
Last Post: egorrabota
  T46G - firmware downgrade jgolinuc 1 1,264 08-07-2020 02:05 PM
Last Post: complex1
  T46S firmware 66.85.0.5 not holding properly crazytel 2 2,188 07-09-2020 06:55 AM
Last Post: CCP
  Need to remove custom Fonality firmware 1CCT 13 9,979 06-18-2020 05:51 PM
Last Post: wadeorigger
  T42G with firmware T42-29.83.0.120.rom compsos 1 1,666 02-03-2020 07:48 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication