Screensaver.type on T46S

[complex1]

(11-02-2017 07:34 AM)wim Wrote:  

(10-31-2017 04:06 PM)complex1 Wrote:  

(10-31-2017 02:54 PM)wim Wrote:  We are currently provisioning T46S but I cant figure out how to set screensaver.type to custom. We've uploaded our company's logo with screensaver.upload_url, everything else provisions just fine, except provision.type = 1 does not work. None of our T46S phones sets screensaver type to custom. T46G does it just fine. Ive added the line to both mac and common cfg files. Can anyone help how I could provision this 1 particular setting? I'm using firmware 66.81.188.4 on T46S and 28.81.188.4 on T46G

Hi,

I think you are using the wrong parameter (provision.type)
To switch the Screensaver Type to Custom mode, please use this parameter:

#If it is set to 1 (Custom), the LCD screen will display the custom screen saver images (you need to upload custom image files to the IP phone).
screensaver.type = 1

Hope this will help.

My bad, that was a typing error. I do use the parameter screensaver.type = 1. my parameters are as follows:
screensaver.display_clock.enable = 1
screensaver.upload_url = http://x.x.x.x/image.jpg
screensaver.wait_time = 120
screensaver.type = 1
screensaver.picture_change_interval = 300
screensaver.clock_move_interval = 60

All other parameters work as intended. I just cannot set screensaver type to custom via that line.

Hi,

Because your phone is running the Lydis v81 firmware, please use this parameter screensaver.mode = 1 (x.81.x.x) instead of screensaver.type = 1 (x.82.x.x) and try again.

Hope this will help.