peteatwork333
Junior Member
Posts: 4
Joined: Apr 2015
|
RE: Action URI - click to call Working with Telify 1.3.6 and Yealink T46G
Hi everyone.
Today I got this to work for me... here were my steps:
FYI: I am in CANADA and my phone can dial any North American number. I use a CRM and can make direct calls from my CRM using my desktop phone. There is no need to pay $$$ for expensive integration!
Download and install Telify 1.3.6 for firefox
When loaded, edit the settings by clicking options:
Used Protocol: Custom URL
Custom URL: http://$1/servlet?number=$0
$1 is phone ip address . this is entered in the 1st variable box eg 192.168.1.123
$0 is short for [phonenr] which is the number pulled from the web page you are clicking
In yealink phone settings: Go to Features... Remote Contol
Type in : Action URI Allow IP List : ENTER IP ADDRESS OF THE PC you are using to click on phone numbers connected to the same network. should be the same IP address as above $1 eg 192.168.1.123
Also, as others have mentioned: The first time watch your phone LCD for the "Allow Remote Control" message and press yes
I hope this helps some of you.
Cheers
Peter
(This post was last modified: 11-14-2016 09:43 PM by peteatwork333.)
|
|
11-14-2016 09:40 PM |
|