Autoprovision - config file encryption problem

[Yealink Support]

Hi oea,
Please test below steps and kindly feed back to me.
Don't forget to enable "auto_provision.aes_key_in_file =1" in the CFG file before upload encryption files.
1. Add/Edit the following parameters in configuration files(not encryption). Then do auto provisioning to all phones.
-----------------------------------
#!version:1.0.0.1
auto_provision.aes_key_in_file =1
auto_provision.update_file_mode =1
-----------------------------------
2. The administrator encrypts y000000000007.cfg and MAC.cfg files and put them to the root
directory of the provisioning server.
3. Reboot the IP phone to trigger auto provisioning process. For more information, refer to Yealink IP Phones Auto Provisioning Guide.