Local Sip Port - Set Range of Ports?

[complex1]

Hi Chris,

If you have all phones in the same LAN, it is in my opinion it not necessary that each phone have another Local SIP Port, because each phone have his own and different IP-address and that’s make the phones unique. So all phones can use the same Local SIP Port e.g. 5070.

This is different when you are going to use the phones outside the LAN, than each phone must have a different Local SIP Port because each phone use the same WAN IP-address. In this case the Local SIP Port makes them unique and not the IP-address.

It’s just a thought.