T46G TIME Calculation Problem

[briankelly63]

This is a nasty little bug that changes depending what you do in the UI screen. It is also dependent on whether the phone is configured or not.

I am using the same firmware as you.

If I try and set the values to the same exact values that are included in your picture and then hit Confirm two things happen. The first is that the day changes from 25 to 26 and the Hour changes to 0.

Please look at the attachment.

I just tried the same thing with another T46G running the same firmware and it INITIALLY it worked properly.

BUT If you change the DHCP Time setting on the time screen or change the Date Format from YYYY-MM-DD to WWW-MM-DD and then try to store a 23 in the hour box lots of strange things start to happen

So I did a factory reset on the phone in question and then re-tested. The time setting then works correctly BUT If I Import the previously Exported configuration the problem returns.

So it would seem there is a corruption issue that is preserved during an Export - Import.

I did another factory reset but DID NOT reload my configuration. In this case the settings work properly and the UI allows me to set 23 as the hour no matter what the other settings happen to be.

I will send you the config.bin that I am using so you can load it and test what is happening.

Something is being corrupted by my configuration. The only unusual thing in my configuration is that I have a VPN file set loaded. It is NOT enabled but it is loaded.

CONFIG.BIN FILE HAS BEEN SENT TO YOUR SUPPORT EMAIL ALSO INCLUDED IS A VIDEO OF THE ISSUE