EXP40 Backlight

[Boolah]

This only somewhat works (in fact, it works so poorly that I didn't think changing this setting affected the EXP40 at all).

Irrespective of the setting, the backlight on the EXP40 is not the same brightness as that of the T46G. There is very little difference on the EXP40 when changing the backlight intensity between 3 and 10, whereas the T46G gets much brighter/dimmer as the values are changed. There is a drastic difference on the EXP40 between backlight values of 3 and 2. Setting a value of 1 or 2 virtually turns the backlight on the EXP40 off completely where, with the same values, the T46G gets progressively dimmer.

Perhaps I have a defective EXP40 (I only have one as I'm testing the phone). Can anyone else confirm this behavior? I'm running firmware version 28.71.0.85