[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G Redefine Hold Button - Ques
Author Message
alexgonzalez Offline
Junior Member
**

Posts: 38
Joined: Jul 2014
Reputation: 0
Post: #39
RE: T46G Redefine Hold Button - Ques
(09-29-2020 07:49 PM)chrisduncansb Wrote:  
(09-29-2020 07:42 PM)alexgonzalez Wrote:  i have been on their tech team for months now, with them doing all these things showing us how to get around it.
This way, it uses the phone's call park method, which you can't set properly in it's current state. (not like the same as a soft key, for some reason). So mine, calls out the parking location to the person that is getting "put on hold" parked, instead of to the attendant who is parking the call. So while it does "work", it's doesn't work properly for me or others. I have been "fighting-discussing" with them about this for months, just to get them to understand what we want. I told them i would pay for the development of just adding this. THey gave me this work around that doesn't work fully, and said they would fix it, but then close the ticket and tell me "too bad". SO this is as far as i have been able to get them to go.

THis is the most read thread and posts, and yet they don't seem to care to really solve it? it goes back years.....

When I tested it, the parking spot was announced to me as the user who parked the call. It was not announced to the caller who was parked.

Would you mind sharing what you have the phone settings set to for the CALL PARK function?
Under the DSSkeys, Transfer, 70, Call Park label, works. Calls out parking location to us.
Using the config setup as they stated, with the Cark Park functions listed under the phones FEATURES TAB, PICK UP & PARK, set to Call park MODE = Transfer, park = ENABLED, Code set to 70 doesn't work, calls out to the caller instead of us here.
09-29-2020 08:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T46G Redefine Hold Button - Ques - CWR - 04-08-2014, 01:12 AM
RE: T46G Redefine Hold Button - Ques - CWR - 04-08-2014, 02:57 AM
RE: T46G Redefine Hold Button - Ques - CWR - 04-08-2014, 04:37 AM
RE: T46G Redefine Hold Button - Ques - CWR - 02-04-2015, 09:16 AM
RE: T46G Redefine Hold Button - Ques - CWR - 02-04-2015, 02:09 PM
RE: T46G Redefine Hold Button - Ques - alexgonzalez - 09-29-2020 08:08 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  music on hold triggers randomly bfcoi974 1 1,832 Yesterday 06:32 PM
Last Post: alanwaker
Smile T43U handset only works when headset button is green jaydub 2 283 03-21-2024 07:13 AM
Last Post: jaydub
  Need bin and rfs files SIP-T46G RobbyK 1 739 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 980 01-11-2024 10:52 PM
Last Post: RobbyK
  Provision Button back to blank glennbtn 0 407 01-10-2024 06:34 PM
Last Post: glennbtn
  How to stop transferring calls on hold EcoEco 0 688 10-24-2023 09:08 AM
Last Post: EcoEco
  T46G recovery files evoip 1 1,376 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  Disable X button to reject calls hercross 0 771 07-07-2023 04:01 PM
Last Post: hercross
  T46G Multiple EXT Port amandah 2 1,978 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,137 03-29-2023 05:36 AM
Last Post: matthewchubb

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication