[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
VP530 - Disabling my face while in standby + Doorphone volume
Author Message
Mauro Offline

Posts: 58
Joined: Nov 2012
Reputation: 1
Post: #3
RE: VP530 - Disabling my face while in standby + Doorphone volume
(07-02-2013 02:00 PM)Yealink Support Wrote:  1. About the local camera, sorry we don't have an option to disable it currently, but i think we will have this option in the future. You can rotate it down so you will not see your face in standby mode.
I think this option (just pressing the webcam key from standby, maybe?) could be nice.
Quote:2. Sorry we don't support that feature. Do you think the default voice is too loud or low? Generally it's used only for open the door, do you need to check with the person that outside the door who is him?
Maybe we misunderstood the purpose of this feature on the phone? Let me try to recap.
We have a video intercom placed outside the door, linked to the door opening mechanism. When someone (outside the door) pushes the button of the intercom, the phones inside the office (inside the door) ring. One of us picks up the call, asks "who's there?", the people outside replies "I'm Bob, I have an appointment with Mark", then we press a specific number key on our phone (that is recognezed as a command by the intercom), and the door lock opens, so Bob can enter. Calls are only originated from the intercom, that is configured to do not answer to incoming calls. This works correctly without the need to inform the phone that the intercom is actually an intercom.
Yesterday we found this "door phone" configs on the phone, that we think informs the phone that a specific "internal number" is an intercom with door-opening feature: on the phone display, a button to open the door appears while talking with that number: we suppose it is simply a shortcut that does the same exact thing we usually do by pressing the specific number key on the phone that the intercom recognizes as "open door" command.
Hence, we still need to talk with who's outside the door (it's just a normal call, simply with the "open door" button shown on display in addition). While the current volume seems correct, we don't see the reason this should differ from the volume you use for all other calls.
Maybe we did not figure out correctly the purpose of those "door phone" settings?
Of course, we may just don't configure the "door phone" settings on the VP530 and then that call will be like any other video call, with the ability to control volume... plus the ability to open the door by pressing the designed number key.
Quote:3. About this enabling webcam request, generally door phone will display the webcam by default, so you can know who is outside the door. Maybe you can check in 2N side that whether they have such option to disable the webcam?
Are you referring to my "PS" in my previous post? In that post, I was not talking about the "door phone" settings anymore: I was referring to videocalls in general. I mean, when "A" calls "B" from a VP530 to another VP530, when "B" picks up the phone, he sees "A" face. If "A" does not want to be seen, he has to press the webcam button to disable it. The question is if there is a way to invert default behavior: when "A" calls "B", "B" does not see "A" until "A" presses the webcam button.
UPDATE: Just an idea, but maybe it's stupid: maybe this may simply follow the current setting you will have for standby mode... if you have webcam off in standby, it will be off also during call... if you have webcam on in standby, it will be on also during call. Uhm... maybe this one is a bad idea.... maybe they should be two independent settings.
(This post was last modified: 07-02-2013 05:33 PM by Mauro.)
07-02-2013 04:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: VP530 - Disabling my face while in standby + Doorphone volume - Mauro - 07-02-2013 04:37 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  VP530 and register iromero 2 9,445 01-24-2019 09:15 AM
Last Post: Robert533
  [split]Remote phonebook issue with VP530 todubiyi 2 7,319 05-31-2018 02:27 PM
Last Post: Karla Maria
  Call from VP530 to VC400 is possible? cozpler 1 7,359 06-03-2016 05:31 AM
Last Post: Yealink_Michael
  VP530 and Smartphone Android VIDEO CALL valentinesquenet 1 8,823 06-03-2016 05:26 AM
Last Post: Yealink_Michael
  VP530 with Robin Doorphone Jerome Clamot 1 6,186 03-15-2016 07:31 PM
Last Post: Karl_Yealink
  VP530 - Remote control with HTTP commands matzu 3 8,813 02-11-2016 07:43 PM
Last Post: brocksolo
  VP530 No sound for caller incoming call sjolmers 1 7,071 12-09-2015 11:15 PM
Last Post: Karl_Yealink
  Disable or remove DND Button on Screen of VP530 amit_nsec 3 8,766 09-02-2015 03:21 PM
Last Post: amit_nsec
  VP530 video bug qube001 1 5,389 08-08-2015 05:31 AM
Last Post: Yealink_Michael
  A few questions about the VP530 provisioning tb303 5 9,384 07-09-2015 02:23 PM
Last Post: tb303

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication