[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EXP39 buttons fail to change status, phone requires reboot to fix
Author Message
Benoiti Offline
Junior Member
**

Posts: 5
Joined: Jun 2013
Reputation: 0
Post: #1
EXP39 buttons fail to change status, phone requires reboot to fix
Hello, I have an ongoing issue with two remote extensions (T28P) with EXP39 consoles.

System: FreePBX Stable-3.211.63-10 64Bit running on Intel DN2800MT, 2gb ram with 64gb SSD

Yealink T28P firmware: 2.70.0.140
Hardware version: 1.0.0.39

EXP39 firmware: 5.16.0.0
Hardware version: 32.0.0.0

There are eight phone/console extensions on the local network and two phone/console extensions in another city which connect over the internet.

At least once a day, either of the two phones will receive notification packets of incoming calls and the console BLF LEDs will flash to indicate which extensions are ringing. When the call is answered, one of the LED's will continue to flash and the status icon on the LCD will still show the station as ringing. In this condition, the extension cannot be dialed by pressing the BLF button.

It us usually the extension that picked up the call. Sometimes, the extension will appear busy even though the call has ended. This only happens on the two remote extensions, never any of the local phones. I suspect this is partly caused by packet loss since we have a poor carrier system here and I have configured TCP on all extensions, as UDP is too unreliable over the public internet.

I tried calling the extensions in the hope that Asterisk would send out new status notifications to the extensions and cause the buttons to reset, but nothing seems to work and rebooting the phones is the only way to reset the LED's and the LCD display.
06-19-2013 04:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
EXP39 buttons fail to change status, phone requires reboot to fix - Benoiti - 06-19-2013 04:26 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Information How to reboot T19P_E2 by HTTP? ogankvik 13 21,678 12-09-2021 06:30 PM
Last Post: complex1
  How to change voice when busy, waiting and other.. T20P marin 0 4,157 04-11-2019 12:53 PM
Last Post: marin
  T29g mount to analog phone mount Lisbon Creek 0 4,723 12-14-2018 02:42 PM
Last Post: Lisbon Creek
  Ringtone over 100kb in size and change the default tone Sv9t 4 15,845 02-12-2018 10:23 AM
Last Post: hand
  Enter SIP Server on phone interface afsfwmw90rfj 10 25,516 06-01-2017 04:55 PM
Last Post: complex1
  Can't pick up another line when phone rings Barnabas 4 17,186 11-04-2016 03:31 PM
Last Post: gdrewry
  Fail to download remote phonebook (XML) gradash 1 15,460 10-15-2016 02:05 AM
Last Post: CWR
  T20p phone No Services. srini 1 8,237 09-26-2016 10:14 PM
Last Post: Lucia_Yealink
  T27P Remote Phone Book "URL is empty" rpenner 0 5,467 08-26-2016 02:19 AM
Last Post: rpenner
  T28P Phone identifies itself by IP address instead of user and extension mazuno13 5 13,150 03-08-2016 01:24 AM
Last Post: mazuno13

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication