[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
wrong default line with DECT Handset
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: wrong default line with DECT Handset
(01-06-2023 02:14 AM)cbergmann Wrote:  hi,

I have 4 yaelink W52H handsets with the corresponding W52P Base.
I have 4 lines configured and everything works as intended with the 4 yaelink handsets.
Now I need a nother handset. So I ordederd a handset from another vendor and registed it to the base. The registration and incomming calls are working fine.
Unfortunately I can not call out from the new handset.
Regarding the number assigment (incomming and outgoing Lines) the new handset is configured exactly like one of the W25H handsets that are working fine.

When I set the debug level in syslog to 6 and make a call from the working handset the first lines read the following:

Code:
Jan  4 07:02:46 192.168.2.242 DEBS[1137]: SS7 <6+info  > Recv:cmd=0x1,len=280
Jan  4 07:02:46 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspLineCfm(instance=0x1003002b,line=0x1,bLinePossible=0x1)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > Recv:cmd=0x2,len=36
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(instance=0x1003002b,line=0x1,bDialPossible=0x1,name_len=24)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(inf->multi_name[0]=0)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(inf->multi_name[1]=0)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(inf->multi_name[2]=0)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(inf->multi_name[3]=0)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspDialCfm(inf->multi_name[4]=0)
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: SS7 <6+info  > Recv:cmd=0x9,len=8
Jan  4 07:02:47 192.168.2.242 DEBS[1137]: VOIC<6+info  > dect_chan_alloc(0)

On the not working handset I only get the following lines:

Code:
Jan  4 07:04:01 192.168.2.242 DEBS[1137]: SS7 <6+info  > Recv:cmd=0x1,len=280
Jan  4 07:04:01 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_RspLineCfm(instance=0x1003002c,line=0x7f,bLinePossible=0x1)
Jan  4 07:04:01 192.168.2.242 DEBS[1137]: SS7 <6+info  > Recv:cmd=0x2,len=36
Jan  4 07:04:01 192.168.2.242 DEBS[1137]: SS7 <6+info  > SS7_ReqRelExt(instance=0x1003002c,reason=0x62,rel_msg_len=0)

I think the problem lies in the "line" parameter of the SS7_RspLineCfm command.
Does anyone know why this value is used?

Kind regards
Clemens

Hi,

Maybe this is the answer to your question: (reading in the Yealink-W52P-Datasheet.pdf)

Yealink DECT technology is based on CAT-iq2.0, which focuses on high quality Audio VoIP (wideband), as well as low bit - rate data applications. But we are not compatible with any third-party DECT devices (base station, handset, etc.).

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
01-06-2023 07:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: wrong default line with DECT Handset - complex1 - 01-06-2023 07:44 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T58 Handset dead / after update no service dmaack 1 511 01-24-2024 12:04 AM
Last Post: complex1
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 648 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Display 0 for line pickup SupportA 0 1,103 07-12-2023 08:51 PM
Last Post: SupportA
  Default password resets itself pchristofi 2 1,879 06-26-2023 05:11 PM
Last Post: pchristofi
  Set default account via XML programming jsubirana 2 4,550 12-22-2022 12:05 AM
Last Post: clarityvoice
  MP54 factory default gshamburg 1 3,217 06-07-2022 01:50 AM
Last Post: complex1
  Best way to manage line keys on multiple T48G/S sani390 0 3,426 07-01-2021 02:06 PM
Last Post: sani390
  Change default admin password with config file? PeterSkiles 1 7,530 05-18-2021 01:22 AM
Last Post: complex1
  Keep Alive Type : What is "Default"? neurosys 2 18,896 10-08-2020 12:05 PM
Last Post: Iskratel
  Line LED on/off and color AndyM 0 4,255 07-07-2020 02:40 PM
Last Post: AndyM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication