[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T42s VPN & local SIP Accounts noch work, only one of them
Author Message
mysterox Offline
Junior Member
**

Posts: 1
Joined: Oct 2022
Reputation: 0
Post: #1
T42s VPN & local SIP Accounts noch work, only one of them
Hello all,

I have a problem with my T42s phone.
I use the internal VPN client to connect to my employer and then log in to my employer's phone system with account 1.
This all works great and I can make calls over this connection without any problems.

Account 2 should connect to my AVM FritzBox and be used for my private connection.

The phone says it is logged in, I can then also make calls via my private number, but there is no communication.

When I call my private number, it doesn't even ring.

As soon as I deactivate the VPN, the phone works via my private number.
The Fritzbox also displays the following message: "Internet telephony with mysterox via 10.9.0.2:5060 was not successful. Cause: (408) [5 messages since 25.10.22 14:49:34]"

However, 10.9.0.2 does not belong to my network but to the VPN network.
The user name "mysterox" is the user name for logging on to the Fritzbox locally.

Somehow the routing does not seem to work properly.
Do I have to change anything in the VPN.cnf or the settings in the phone?

My config looks like:
#!version:1.0.0.1

### This file is the exported MAC-all.cfg.

### For security, the following parameters with password haven't been display in this file.
###account.1.password =
###account.2.password =
account.1.auth_name = 1337
account.1.display_name = aixtema
account.1.enable = 1
account.1.label = aixtema
account.1.ringtone.ring_type = Resource:Ring11.wav
account.1.sip_server.1.address = xxxxx
account.1.user_name = 1337
account.1.vpn_address_take_precedence = 1
account.2.auth_name = xxxxx
account.2.display_name = privat
account.2.enable = 1
account.2.label = privat
account.2.ringtone.ring_type = Resource:Ring10.wav
account.2.sip_server.1.address = fritz.box
account.2.user_name = mysterox
account.2.vpn_address_take_precedence = 0
lang.gui = German
linekey.1.value = 0
linekey.2.value = 0
linekey.3.label = xxxxx
linekey.3.line = 2
linekey.3.type = 13
linekey.3.value = xxxxx
linekey.4.label = xxxxx
linekey.4.line = 2
linekey.4.type = 13
linekey.4.value = xxxxx
linekey.5.label = xxxxx
linekey.5.line = 2
linekey.5.type = 13
linekey.5.value = xxxxx
linekey.6.value = 0
linekey.7.label = xxxxx
linekey.7.line = 1
linekey.7.type = 13
linekey.7.value = xxxxx
linekey.8.label = xxxxx
linekey.8.line = 1
linekey.8.type = 13
linekey.8.value = xxxxx
linekey.9.label = xxxxx
linekey.9.line = 1
linekey.9.type = 13
linekey.9.value = xxxxx
local_time.date_format = 2
local_time.time_zone = +1
local_time.time_zone_name = Germany(Berlin)
### Static Configuration ###
static.network.internet_port.gateway = 192.168.100.1
static.network.internet_port.ip = 192.168.100.201
static.network.internet_port.mask = 255.255.255.0
static.network.internet_port.type = 2
static.network.ip_address_mode = 2
static.network.preference = 1
static.network.primary_dns = 192.168.100.1
static.network.vpn_enable = 1
static.network.wifi.internet_port.type = 0
static.network.wifi.ip_address_mode = 0
static.network.wifi.ipv6_icmp_v6.enable = 1
static.network.wifi.ipv6_internet_port.type = 0
static.network.wifi.ipv6_prefix = 64
static.network.wifi.ipv6_static_dns_enable = 0
static.network.wifi.preference = 0
static.network.wifi.static_dns_enable = 0
sip.listen_in_peer_localip.enable=0



Thanks & greetings

Thomas
(This post was last modified: 10-27-2022 06:21 PM by mysterox.)
10-27-2022 04:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T42s VPN & local SIP Accounts noch work, only one of them - mysterox - 10-27-2022 04:54 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question SMS/Text Auto Reply on T42S tcodispot 0 401 01-09-2024 03:51 AM
Last Post: tcodispot
  Firmware T42s Raimundo 1 1,341 11-23-2023 06:45 PM
Last Post: Darsh
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,720 07-28-2023 10:27 PM
Last Post: complex1
  T43U T42S Call Park BLF robm 0 978 05-19-2023 12:16 AM
Last Post: robm
  Yealink T46S Forwarding does not work!! Müller 0 1,346 10-16-2022 03:38 AM
Last Post: Müller
  T42S unable to update firmware brianstoiber 6 7,749 09-30-2022 05:31 PM
Last Post: complex1
  T46G - shortcut to activate/ deactivate accounts? westats 4 5,470 07-07-2022 11:40 AM
Last Post: westats
  T42S & T46S On Vonage stratos 1 2,757 06-16-2022 05:31 PM
Last Post: complex1
  Compatibility T42S with WH62 NikolaB 2 3,603 05-09-2022 10:23 PM
Last Post: NikolaB
  T42S Handset Clips stratos 0 2,153 01-26-2022 10:34 PM
Last Post: stratos

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication