[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Loading the configuration every time after reboot
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 44
Post: #2
RE: Loading the configuration every time after reboot
(05-19-2022 08:06 AM)goodtm Wrote:  Hello. I have a question. I have the Auto Provisioning function configured in the Endpoint Manager module, Asterisk Freepbx. The function is working. Configurations of the mac address type are uploaded to phones. If the phone is reset to factory settings, it will receive the configuration after switching on. If in the future I change something in the settings via the web interface (for example, disable the extension (account), then after restarting the account will remain disabled. I thought that after the reboot, the configuration would be downloaded again and the account would be enabled, but this is not the case. Even if you forcibly click on Auto Provisioning from the web interface, the account will still be disabled. The situation can only be corrected by sending the configuration to the phone via Freepbx Endpoint Manager. Question - How can I make sure that rebooting the phone loads the configuration from the tftp server every time?

Setting auto_provision.custom.protect = 0 and weekly configuration loading via static.auto_provision.weekly.enable = 1 (or Repeatedly On) also does not help. The configuration will be loaded on reboot, something is changed in the mac configuration on the tftp server. Or I can force the configuration to be sent to the phone via the endpoint manager module in asterisk freepbx

There was a similar question earlier, but it seems it remained without a solution http://forum .yealink.com/forum/showthread.php?tid=43824

Hi,

As far as I know if there is no configuration change on the server side, the phone will not download the configuration file.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-19-2022 05:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Loading the configuration every time after reboot - complex1 - 05-19-2022 05:20 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Encrypted Configuration and WebItemsLevel.cfg Jonn 0 1,435 01-01-2023 09:09 AM
Last Post: Jonn
  AutoP vs refresh configuration mattf 0 4,094 01-23-2021 10:42 AM
Last Post: mattf
  Remote configuration overwriting local configuration cdesbouche 1 7,037 04-11-2020 05:58 PM
Last Post: complex1
  T4xx phones, load additional configuration after start possible? DanH 0 3,544 04-03-2020 04:02 PM
Last Post: DanH
  Auto Provision - first time with encrypting.. Gilb 14 45,146 06-21-2018 10:05 AM
Last Post: wanna
  REmote Phonebook configuration Ben23 1 6,880 05-15-2018 05:49 PM
Last Post: Ben23
Question Autoprovisioned settings reverting to defaults after a period of time Inline Computer Support 1 6,638 02-05-2018 09:58 AM
Last Post: Kevin_Yealink
  Need help with RPS configuration of server and device. chidado 2 10,605 11-25-2017 05:36 AM
Last Post: chidado
  Problems with the Auto Provisioning from the T48S (NTP-Server, TIme and Date) Skamqi 1 7,342 11-08-2017 03:26 AM
Last Post: anonymous1711612242218
  Autoprovision to include OpenVPN Configuration MattToner 4 13,187 03-24-2017 04:18 PM
Last Post: syadnom

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication