Remote or local directoy : avoid groups

[4Next]

On a T46S, with firmware 66.86.0.15

I've setup a directory configuration this way :

Code:

<root_favorite_set>
        <item id_name="remotedirectory" display_name="OurRemoteApp" priority="1" enable="1" />
        <item id_name="localdirectory" display_name="Local" priority="2" enable="1" />
        <item id_name="history" display_name="History" priority="3" enable="1" />
        <item id_name="networkcalllog" display_name="Network CallLog" priority="3" enable="0" />
        <item id_name="ldap" display_name="LDAP" priority="5" enable="0" />
        <item id_name="networkdirectory" display_name="Network Directories" priority="6" enable="0" />
</root_favorite_set>

Working great, except that user has to type one extra time to really access OurRemoteApp or the Local directory, see screenshots
I know this is intended to be devided by groups, but this is not required here.
Is there a way to avoid this ?







If not possible, I'll apply this : http://forum.yealink.com/forum/archive/i...-2280.html
Define two hotkey that will go directly to Local and OurRemoteApp

Thanks in advance !