security.user_password dosn't work since 85.0.5 ROM

[Daryl_Yealink]

Dear Customer,

This is Daryl from Yealink Support Team, nice to work with you.

I have tested the parameter on my T46S with the firmware 66.85.0.5 but it can set the admin password normally by auto p.
I have added my cfg file to the this google drive, please check and test again with it.
https://drive.google.com/file/d/1UPX9sjE...sp=sharing

If it still donsn't work, I may need your help to reproduce the issue and offer us some diagnostic files for further analysis.
Please refer to below FAQ on how to obtain the files:
http://support.yealink.com/faq/faqInfo?id=707


The specific Operations: log in the web GUI-> Settings->Configuration-> change the local log level to 6-> Confirm-> press Start-> Auto Provision->set the password by auto provision->Configuration-> press Stop-> Export All Diagnostic Files-> send to me.

Best Regard,
Daryl