I'm having a strange issue with repeated autoprovisioning. My configuration consists of y000000000000.boot, an included file, and a $MAC.cfg file. The initial two files are served via TFTP, and the final one is served via HTTP.
If I factory reset the phone, it will correctly download all three files - two via TFTP, and the final file via HTTP. However, the next time it autoprovisions (I set repeatedly = yes, and interval = 1 minute), the phone only downloads the TFTP files. It never requests the HTTP file. I have verified this using the PCAP diagnostic file.
y000000000000.boot:
Code:
#!version:1.0.0.1
## The header above must appear as-is in the first line
include:config <bh-provision.cfg>
overwrite_mode = 1
specific_model.excluded_mode = 0
bh-provision.cfg:
Code:
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
static.auto_provision.server.url = http://x.x.x.x:8088/phoneprov/$MAC.cfg
static.auto_provision.repeat.enable = 1
static.auto_provision.repeat.minutes = 1
$MAC.cfg (some lines removed, e.g. SIP registrations, passwords etc.)
Code:
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##
local_time.date_format = 6
local_time.ntp_server1 = uk.pool.ntp.org
local_time.time_zone = 0
local_time.time_zone_name = United Kingdom(London)
push_xml.sip_notify = 1
static.network.dhcp_host_name = Reception
static.firmware.url = http://x.x.x.x:8088/phoneprov/T46S(T48S,T42S,T41S)-66.84.0.90.rom
static.auto_provision.custom.protect = 0
static.auto_provision.repeat.enable = 1
static.auto_provision.repeat.minutes = 1
Anyone have any ideas why this might be happening? It looks like a bug to me, especially since it works once after a factory reset. All ideas and suggestions gratefully received!
