[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G - Fall Back issues - Successive setting [Solved]
Author Message
BobBluePackets Offline
Junior Member
**

Posts: 10
Joined: Dec 2017
Reputation: 1
Post: #1
T27G - Fall Back issues - Successive setting [Solved]
We are working with two FreePBX systems - configuration is identical on the two, at least in terms of FreePBX/Asterisk base settings and Extensions settings - basically a poor mans redundancy

All phones are on the following firmware, 69.84.0.10, but we have also tested a few of the phones on the latest 69.84.0.15 firmware (just in case).

The phones are auto provisioned, and we have setup the phones to work in fallback mode e.g.
1) SIP Server 1 and SIP Server 2 set (ip addresses for the moment - no DNS names used) - keeping it simple
2) No Proxy setup
3) Registration type set to 1 (successive) - not concurrent

Approximately 140 of 151 Yealink T27G phones Register with the Primary Server correctly and do not register with the Secondary Server (exactly what is expected)
Remove the Primary Server, and they all switch over to and register with the Secondary Server, bring the Primary Server online and within a short time, they are all registered back on the Primary server and deregistered with the Secondary Server

However I have 11 -13 of the T27G models that when brought online, they register to both Primary and Secondary (almost as though they are set to concurrent registration).

I have checked configuration, exporting the configuration from a unit that works correctly and one that does not - performed a diff and found no differences other than the password and extension number details.

Anyone else come across this issue....any thoughts....

Regards
Bob
(This post was last modified: 05-30-2019 02:42 AM by BobBluePackets.)
01-24-2019 12:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T27G - Fall Back issues - Successive setting [Solved] - BobBluePackets - 01-24-2019 12:45 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  WH66 Issues tsduke03 2 255 Today 01:06 AM
Last Post: tsduke03
  UVC40 - Freezing issues ecr@3ctechnology.no 2 2,754 01-31-2024 05:10 PM
Last Post: WilliamShipman
  [SOLVED] Enable/Disable Account on keypress Ferdinand 3 11,186 08-22-2022 03:55 PM
Last Post: rvv
  USB Upgrade issues acwells 5 9,462 08-25-2021 10:51 PM
Last Post: Your Voice
  [SOLVED] W80B stuck, Update FW msg brucesmith 0 4,359 06-04-2021 05:42 PM
Last Post: brucesmith
  T27G EOL ? oliv 2 6,160 05-08-2021 04:24 AM
Last Post: Yisroel_MongoTEL
  SIP-T27G and WF50 pdjhh 0 3,257 08-24-2020 04:34 AM
Last Post: pdjhh
  VP59 - Teams-to-Teams Federated User issues darwin.ranzone@originnet.com 0 4,220 07-23-2020 04:41 PM
Last Post: darwin.ranzone@originnet.com
  T27G - BT40 - CP700 jakthree 2 6,846 06-15-2020 04:08 PM
Last Post: jolouis
  T27G openvpn systems 4 12,000 03-16-2020 10:08 AM
Last Post: free2k

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication