New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T40G defaults to ntp time?
Author Message
Retcheverry Offline
Junior Member

Posts: 1
Joined: Oct 2018
Reputation: 0
Post: #1
T40G defaults to ntp time?
Hello all,

I've been configuring a PoC with Yealink T40g's.
One of the things I've been noticing is that the latest 3cx approved firmware: 76 83 0 55 has the DHCP time option set to no and tries to get its time from
That's fine and dandy on an open network but this implementation has all the IP phones on their own subnet and only able to talk to the VoIP server and themselves.
These are the first 5 phones I'm using for a PoC, but the final setup will have between 50 and 100 phones.
My point is: ¿Why is the DHCP option OFF by default? That makes it so much harder to auto-provision. If the time cannot be set because the phone ignores DHCP options for time server then the auto-config fails due to the https cert not being yet valid!

This only has 3 solutions in my opinion:
1. Set each and every phone to DHCP time = yes (adding a lot of overhead to an otherwise automatic procedure)
2. Allow the phones to get to the internet (this is frowned upon in this company)
3. Change the default on the firmware, but there might be a reason why the engineers decided to set it to no?

I've currently done a very ugly workaround in that the phones are allowed to only connect to cn pool net org

What would be the recommended solution?

BTW Akismet is blocking my post, had to edit several times, why?
10-26-2018 08:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T40G defaults to ntp time? - Retcheverry - 10-26-2018 08:23 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T40G - Echo problem matts_luminet 3 800 06-22-2019 07:25 AM
Last Post: complex1
  time not syn from NTP server ettaleb79 3 8,292 04-11-2019 01:06 PM
Last Post: Libertis
  Yealink T46S/T40G muffled/feint audio Stacy63 1 1,277 12-12-2018 02:50 PM
Last Post: complex1
  [T48] - NTP time update fails DennisT 0 1,007 07-17-2018 05:45 PM
Last Post: DennisT
  T48G Webrequest Time Outs? Solved Attila 0 880 07-07-2018 06:41 AM
Last Post: Attila
  Need T40G Recovery Files YOVU Cloud 1 1,430 04-20-2018 11:54 PM
Last Post: complex1
  T4xG series having time issues KNERD 4 3,717 04-20-2018 08:51 PM
Last Post: KNERD
  Date and Time Incorrect on T40G Phones NETiMAGE 1 1,811 02-19-2018 06:23 PM
Last Post: complex1
  Time & date always reset after rebooting. H3nry 1 1,613 11-23-2017 09:59 AM
Last Post: Lucia_Yealink
  T48G's Return Time GaryWhite 1 1,446 11-23-2017 08:22 AM
Last Post: Elaine_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication