[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade
Author Message
KM Tire IT Support Offline
Junior Member
**

Posts: 2
Joined: Oct 2018
Reputation: 0
Post: #1
Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade
I originally posted this on the 3cx forum but they pointed me to the Yealink forum. I don't believe this is specifically a 3cx issue but for whatever reason we noticed the issue about 3 weeks after updating 3cx from v14 to v15.5.

I have Yealink T22P, T28P, and T27G phones. The T27G is being setup on a switch that does not have 802.1x setup. After we set it up and take it to it's desk, where 802.1x is setup, the phone won't connect to the network. If I provision an old T28P to the same extension and install it the phone boots and works without issue. If I log into the switch and disable 802.1x the T27G connects and works fine. I've tried the original templates that we've always used and I tried updating the default T27G template that came with 3cx and get the same result.

We are using NPS on server 2016 for the server that auth's phones and pc's. On the NPS server we're seeing the following message. The issue is that all the phones use this account, the configs are the same in each phone template so I'm not sure why only the T27G's does this:

Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: Connections to other access servers
Authentication Provider: Windows
Authentication Server: $domaincontroller
Authentication Type: EAP
EAP Type: -
Account Session Identifier: 3035303045324646
Logging Results: Accounting information was written to the local log file.
Reason Code: 65
Reason: The Network Access Permission setting in the dial-in properties of the user account in Active Directory is set to Deny access to the user. To change the Network Access Permission setting to either Allow access or Control access through NPS Network Policy, obtain the properties of the user account in Active Directory Users and Computers, click the Dial-in tab, and change Network Access Permission.


The switch we're using is a Cisco SF300. The message we see when debugging the port is:

%SEC-W-SUPPLICANTUNAUTHORIZED: username Yealink with MAC <mac address> was rejected on port fa33 due to wrong user name or password in Radius server

I've tried T27G firmware 69.84.0.10, 69.83.0.20, and the original firmware 69.81.0.106.rom. They all have the issue.

In the Template for the 802.1x configs I see the following configs.
network.802_1x.mode = 3
network.802_1x.identity = Yealink
network.802_1x.md5_password = $mypassword
network.802_1x.root_cert_url = %%PROVLINK%%/TrustCertificatesNorton.cer

When I look at the yealink information I see that the commands should be
static.network.802_1x.mode = 3
static.network.802_1x.identity = Yealink
static.network.802_1x.md5_password = $mypassword
static.network.802_1x.root_cert_url = %%PROVLINK%%/TrustCertificatesNorton.cer

Neither of these configs work and I can't seem to find any other configs that would be the problem. Has anyone run into this problem with Yealink's on 802.1x setups?
10-17-2018 12:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade - KM Tire IT Support - 10-17-2018 12:09 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 firmware upgrade janp 0 3,834 01-27-2024 02:43 AM
Last Post: janp
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 27,560 12-27-2023 06:49 PM
Last Post: nolto
  T27G does not "detect" WH62 usb connected headset oliv 1 3,104 02-08-2023 09:32 PM
Last Post: oliv
  Which Yealink USB headset complies with T2xG/T2xP series ? oliv 2 3,659 02-08-2023 09:30 PM
Last Post: oliv
  Possible upgrade T26P Zdenda_Enter 3 5,897 07-12-2022 04:23 PM
Last Post: Zdenda_Enter
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 6,402 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  how to connect yealink T23G to mikrotik openvpn server m.taghavi 4 15,527 10-11-2020 11:31 AM
Last Post: bozko
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 10,554 09-21-2020 05:16 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 58,552 06-27-2020 10:13 AM
Last Post: complex1
  Provision T27G Prefix rubberducky 1 5,886 05-12-2020 09:43 AM
Last Post: Telepath

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication