[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G Incoming Transfer Ring Question
Author Message
mike366 Offline
Junior Member
**

Posts: 15
Joined: Oct 2013
Reputation: 0
Post: #1
T48G Incoming Transfer Ring Question
May apply to other phones, not sure, but is an issue on t48g:

T48G, rings on first blind transfer from another phone, 2nd simultaneous blind transfer, while she is still on the t48g with the first transfer, does not ring on t48g, just scrolls a note that there is an incoming transfer. How do I make it ring on all transfers to the t48g, so it is more obvious to the t48g user that a transferred call is coming in to her phone, evenif she is already on a call?

So if this actually happened, where do I set it (phone does have call waiting enabled, and call waiting tone is enabled, but she says she does not hear any tone, and wants RING anyway):
Firmware is: 35.83.0.35

http://forum.yealink.com/forum/archive/i...-3100.html
James_Yealink
01-07-2015, 06:48 AM
Hi,

Finally the feature is accepted by our product department and it will be desinged in V81 firmware.(Since the V80 is not desgined as "feature adding" firmware)

According to the design it seems that there will be three options, call waiting tone, ring, silent.

Regards,
James

(08-07-2018 11:16 PM)mike366 Wrote:  May apply to other phones, not sure, but is an issue on t48g, but all incoming calls ring on the T54S, but I don't see any differences in the web interface to each phone:

T48G, rings on first blind transfer from another phone, 2nd simultaneous blind transfer, while she is still on the t48g with the first transfer, does not ring on t48g, just scrolls a note that there is an incoming transfer. How do I make it ring on all transfers to the t48g, so it is more obvious to the t48g user that a transferred call is coming in to her phone, evenif she is already on a call?

So if this actually happened, where do I set it (phone does have call waiting enabled, and call waiting tone is enabled, but she says she does not hear any tone, and wants RING anyway):
Firmware is: 35.83.0.35

http://forum.yealink.com/forum/archive/i...-3100.html
James_Yealink
01-07-2015, 06:48 AM
Hi,

Finally the feature is accepted by our product department and it will be desinged in V81 firmware.(Since the V80 is not desgined as "feature adding" firmware)

According to the design it seems that there will be three options, call waiting tone, ring, silent.

Regards,
James
(This post was last modified: 08-07-2018 11:43 PM by mike366.)
08-07-2018 11:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T48G Incoming Transfer Ring Question - mike366 - 08-07-2018 11:16 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Bug Transfer to Broadworks Network Directory Contacts - screen timeout issue livehappy42 0 288 10-27-2021 07:58 AM
Last Post: livehappy42
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 37,991 08-01-2021 06:14 PM
Last Post: Phil2021
Question T48G + WH66 Futureweb 1 1,483 06-09-2021 09:22 PM
Last Post: Futureweb
  T41S: Bridge current call with a second incoming call digitel 1 1,655 05-21-2021 04:15 PM
Last Post: complex1
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 2,197 04-09-2021 05:16 PM
Last Post: eurix
  extend input time transfer Krisje 5 2,922 03-22-2021 11:29 PM
Last Post: complex1
  T46s rings 1time then silent, should ring 5 times Bizfon 2 2,321 02-25-2021 11:22 PM
Last Post: Yisroel_MongoTEL
  WF50 wifi adapter on T48G? freak 2 5,273 10-31-2020 05:41 AM
Last Post: SCPCJNR
  T48G Onscreen keyboard languages eliah 7 11,371 10-30-2020 06:51 PM
Last Post: complex1
  Caller ID on attended transfer tcarter@teklinks.com 11 24,841 10-27-2020 01:29 AM
Last Post: sentinelace

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication