(01-30-2018 02:33 PM)c99hris Wrote: We use
We have to have a way to export and verify the settings are in the phone, how can we do this?
Dear customer,
You can verify the settings using cfg file which is export from "Settings>>Configuration>>Export CFG Configuration File>>All Settings", but you need to change the parameter you set, because some of your configure parameters are factory setting, so you can't see factory parameter in that file.
Factory parameter:
features.dnd.allow=0
features.feature_key_sync.enable=0
#the default value is 0
features.dnd.feature_key_sync.enable=1
#the default value is 1
features.dnd_mode=0
#the default value is 0, Features->Forward&DND->DND->Mode
features.dnd_refuse_code=480
#the default value is 480, Features->General Information->Return Code
After you change factory parameter as below you can see your settings:
features.dnd.allow=0
features.feature_key_sync.enable=1
#the default value is 0
features.dnd.feature_key_sync.enable=0
#the default value is 1
features.dnd_mode=1
#the default value is 0, Features->Forward&DND->DND->Mode
features.dnd_refuse_code=404
#the default value is 480, Features->General Information->Return Code
And please note that
"features.feature_key_sync.enable" will show as "bw.feature_key_sync =" since it's the old version parameter.
Any question, please feel free to contact us.
Best Regards
Aishion