DialNow delay

[Aishion_Yealink]

(12-22-2017 02:43 PM)IPBX Wrote:  Hi Team,

I set dialnow_delay at 0 second through autoprovionning but dialnow_delay is automatically replaced and set at 1 (the value min I supposed).
Now when I set value through web interface, the dialnow_delay is saved at 0 and the delay for dialling is really 0 all is right as expected.

Why with autoprovisionning value of dialnow_delay is replaced by 1 when I set 0
Is there Issue ?

Firmware Version 52.81.0.25
Hardware Version 52.0.0.0.0.0.0
Device T2x

Regards,

Dear customer,

This is Aishion from Yealink technical team, nice to know you. My pleasure to work for you!

I can reproduce this issue on my side in T23G with V81.0.25, and I also test on my side with V82.0.20, and it works well, I think it maybe a bug in the last version, would you please kindly upgrade to the latest firmware in below link and test again.

http://download.support.yealink.com/down...2.0.20.rom

Thank you very much for your feedback, and if any question, please feel free to contact us.

Best Regards
Aishion