[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cannot get forwarding to work
Author Message
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #2
RE: cannot get forwarding to work
Dear Andrei,

If i don't misunderstand you, you mean you want to use the BSFT version(Broadsoft XSI/Broadsoft XMPP and so on). In our V82 firmware, SIP and BSFT share the same version.But it is SIP version by default. If you want to use the BSFT version, you need to use the parameter below to do auto provision to enable the BSFT version:
bw.enable = 1

If you upgrade from the BSFT version(V81) to V82, then the on/off code for DND and Forward are disabled in the web interface. That is by design.
You can use below parameters to do auto provision to configure the code:
forward.no_answer.on_code=
forward.no_answer.off_code=
forward.busy.on_code=
forward.busy.off_code=
forward.always.on_code=
forward.always.off_code=

features.dnd.on_code=
features.dnd.off_code=


For the forward don't work issue, please change the configure and test below:
features.forward.feature_key_sync.enable=
0-Disabled
1-Enabled, a user changes the forward status on server, the server notifies the phone of
synchronizing the status. Conversely, if the user changes forward status on the phone, the IP phone notifies the server of synchronizing the status.
Note: It works only if the value of the parameter “features.feature_key_sync.enable” is set to 1 (Enabled).

Best Regards,
Lucia
11-07-2017 06:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
cannot get forwarding to work - p2xt - 11-06-2017, 09:54 AM
RE: cannot get forwarding to work - Lucia_Yealink - 11-07-2017 06:17 AM
RE: cannot get forwarding to work - p2xt - 11-07-2017, 10:54 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP54 Call Forwarding pureit2018 0 495 11-23-2023 07:58 AM
Last Post: pureit2018
  Action URL does not work danield 2 10,748 07-31-2020 09:00 PM
Last Post: brickman
  BLF no work in Unify OpenScape Business marioruiz_2811 4 11,496 05-22-2019 02:52 PM
Last Post: turiatel
  VPN Offline allow phone to work Clair 1 7,461 08-04-2017 09:31 PM
Last Post: jolouis
  Configure call forwarding Seb 2 9,560 10-19-2016 12:16 AM
Last Post: yeabee
  Action URL does not work danield 0 4,978 09-13-2016 03:12 PM
Last Post: danield
  Daylight Saving Time endTime don't work as expected amvalente 4 13,562 04-18-2016 08:26 PM
Last Post: grupocodesi
  Call Forwarding bottomsup6 3 9,844 11-24-2015 12:01 AM
Last Post: Karl_Yealink
  Local DHCP doesnt work when OpenVPN is enabled davids@btni.co.uk 3 11,227 11-19-2015 10:22 AM
Last Post: LandonL
  Usernames and Passwords don't work tdhfox21 1 7,185 11-11-2015 06:30 AM
Last Post: rjdefusco

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication