Caller ID on attended transfer

[Aishion_Yealink]

(08-30-2017 08:39 PM)tcarter@teklinks.com Wrote:  Hello,

I have an issue with caller ID not being passed on attended transfer. It works fine on blind transfer. The phones are T42G,T46G,T48G running XX.80.193.130 firmware. It also does the same on T46S running 66.81.193.110.

Example: Inbound caller to ext 101 receives call from John Doe @ 222-222-2222, transfers (attended) to ext 102, ext 102 receives the call but the display only shows Station 101 as the caller ID. Blind transfer displays the caller ID as John Doe 222-222-2222.

Any ideas?

Thanks,

Tim

Dear Tim,

Do you mean after transfer when ext102 are talking with John Doe, the screen on ext102 display ext101 instead of John Doe 222-222-2222, if so, please kindly set below auto provision parameter:

account.x.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 1

For more information about auto provision, please refer to below guide:

http://download.support.yealink.com/down...V81_70.pdf

If the issue still exist, please kindly reproduce the issue and offer us trace files about ext102 for further analysis as below:

a. Level 6 syslog
b. PCAP trace
c. Config.bin

You can get the guide from this link to see how to export the issue data:

http://support.yealink.com/faq/faqInfo?id=311

Any misunderstandings, please feel free to contact us.

Best Regards
Aishion