[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Provisioning Issue auto_provision.power_on = 1 required for Sip Notify
Author Message
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #3
RE: Provisioning Issue auto_provision.power_on = 1 required for Sip Notify
Hi James,

thanks so much for your help. This really helps me a lot and explains things. So is their anything we can do about the phones, which are already provsioned the wrong way? I assume a reset &provision will do the job, right? Of course some custom settings (made by the users) will be lost, but I cannot think of a way to save those conveniently for 200 phones, is there?

best regards Frank

(07-11-2015 09:31 AM)Yealink_James Wrote:  Hello Frank,

There is a parameter:
sip.notify_reboot_enable = (the value range form 0 to 2)

0- If the Notify message carry "Event:check-sync" phone will do an autoprovision. If the Notify message carry "Event: check-sync;reboot=true" phone will do an autoprovision and reboot.

1- Phone will reboot as long as there is "Event:check-sync" in Notify message.

2- Phone will ingore Notify message with "Event: check-sync"

The default value is 1.

So please set the value to 0 and check again.

Regards,
James
(This post was last modified: 07-11-2015 08:48 PM by Frank Drews.)
07-11-2015 08:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Provisioning Issue auto_provision.power_on = 1 required for Sip Notify - Frank Drews - 07-11-2015 08:38 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Bug Transfer to Broadworks Network Directory Contacts - screen timeout issue livehappy42 0 1,115 10-27-2021 07:58 AM
Last Post: livehappy42
  Yealink, provisioning and Sophos firewall UCUC 4 3,425 10-07-2021 10:06 PM
Last Post: complex1
Information How can I set the admin password for T46S during provisioning? proofy 4 8,861 07-08-2021 03:54 AM
Last Post: complex1
  First Notify direct second only after 30-40 seconds? wecloudit 2 2,337 06-15-2021 08:51 PM
Last Post: complex1
  OpenVPN issue with SIP/UDP fredoch 0 2,156 11-10-2020 03:47 PM
Last Post: fredoch
  Conference Bridge Issue with # TampaVoip 3 3,738 09-15-2020 05:20 PM
Last Post: complex1
  T42S Inbound Call Issue rtang 4 5,928 12-22-2019 07:36 PM
Last Post: Yisroel_MongoTEL
  T46S Static IP Issue igendreau 3 5,352 12-19-2019 10:52 AM
Last Post: complex1
  Voice Quality issue - Question to PCAP DanH 6 12,971 10-12-2019 05:29 PM
Last Post: DanH
  Best practices to notify unconditional call forwarding with Asterisk oliv 1 3,250 08-16-2019 10:07 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication