[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call Queue not working with the Grandstream UCM6202
Author Message
jolouis Offline
Moderator
*****

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #5
RE: Call Queue not working with the Grandstream UCM6202
(05-04-2017 05:46 PM)ttran Wrote:  Calling the queue from an internal extension works fine and the phone rings, but not from the outside line. Polycom and Grandstream phones works fine. All other features work fine except the call queue.

Just FYI The grandstream UCs are just embedded asterisk boxes that Grandstream locks down, so if Grandstream doesn't provide any support you might try looking for the issue related to Asterisk in general.

Having said that, what you describe does not make any sense at all, and without knowing your exact configuration it would be impossible to troubleshoot. I would say it sounds more like a general problem with the queue setup... when you says Polycom and GS phones work, have you tried replacing one of them with a Yealink set using the same extension/password? My guess is that it's not the phone that is the problem, but something to do with the extension configuration that you have the Yealink tied to.

From the phone's perspective all it sees are incoming calls; it has no clue whether those calls come from a ring group, a queue, an external # or an internal one... those are all concepts on the PBX side of things. So if you can dial the extension but it's not reachable as a member of the queue, it's a PBX setup issue.
05-11-2017 01:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Call Queue not working with the Grandstream UCM6202 - jolouis - 05-11-2017 01:10 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 25,290 12-27-2023 06:49 PM
Last Post: nolto
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,739 09-14-2020 03:49 PM
Last Post: complex1
  default username/password not working after firmware upgrade tfrohling 3 37,781 02-15-2020 01:30 PM
Last Post: khalidnisar
  Attended transfer not working T29G chysky@slany.cz 1 6,398 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
  T21P backlight not working after F/W update donb 0 4,648 11-07-2019 02:29 PM
Last Post: donb
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 12,198 09-10-2019 10:47 AM
Last Post: DaveThompson
  Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade KM Tire IT Support 1 7,147 10-18-2018 05:06 PM
Last Post: KM Tire IT Support
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,180 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 4,957 03-23-2018 02:52 PM
Last Post: Diego Juan
  T29G DSSKey functionality alternative number call AresK 4 12,379 12-13-2017 06:56 AM
Last Post: Evan_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication