[solved] full freeswitch support please

[support_badger]

(05-15-2015 03:32 PM)Yealink_James Wrote:  Hi Andries,

Very sorry for the late. For some reason, the pcap trace and syslog you attach before can't be downloaded. Can you please send it again?
I had tested with our Freeswitch server before and T22 can work. At firstly it didn't work until I add MAC of T22 to the system.
May I know do you add phoen MAC to your server?

Regards,
James

i've resent the troubleshooting files (using zip this time) to your email address.
Can you provide example of mac config you refer to on the freeswitch server? (config file line text and file location/name?) I'm not doing any auto provisioning and the only examples i've found about client macs are in reference to provisioning config.

Thanks

---

(05-15-2015 10:08 AM)deutschnaftyula Wrote:  do we use FreeSwitch could you please explain your issues with a yealink phones on a free switch system?

Thanks for your reply.

outgoing calls from yealink to local ext or pstn are connected but shown as hung up by yealink in freeswitch logs and on remote client.

"[DEBUG] sofia.c:6623 Channel sofia/internal/1019@th.is.ip.add entering state [terminating][487]
2015-05-15 10:35:41.438547 [NOTICE] sofia.c:7539 Hangup sofia/internal/1019@th.is.ip.add [CS_EXECUTE] [ORIGINATOR_CANCEL]
"

yealink shows hung up call as ongoing on phone display. call is generally hung up too quickly for media to be passed.

incoming calls to yealink go straight to vm as if yealink is not registered at all. no other (software) clients show any of this behavior.

i should note that i'm using freeswitch in proxy-media-mode. no secure transport for sip setup yet.

Thanks again