Caller ID (Name+Number) from local directory not shown in display

[Nasevorn]

I have 3 new Yealink phones, model t46g, firmware Version 28.81.0.15, Hardware Version 28.2.0.128.0.0.0

I have activated function «Display Called Party Information» and «Call Information Display Method» = «Name+Number» (see attachment «settings_call_display.png»). But unfortunately, if somone calls who ist in my local directory, his name ist not shown on the display :-(. I tested also with a picture, but the picture also was not displayed from caller who ist in the local directory (me ;-).

What can i do? It is very important for me to see, if the caller is in my local directory or not. Thank you for every help.

Really no one out there with this Problem, that the data form the local directory is not displayed (in my case name+number) if the caller ist part of the local directory?

10.10.2016
I tried with previous Firmware Version 28.80.0.130, same bug here! Please, Yealink Support, fix this bug or tell me what to do. I need this feature to work!!!

PS: will stay by Firmware Version 28.80.0.130, because of the «Power LED always flashing when backlight is off» bug.

11.10.2016
Problem solved after many hours of hard work. I could not believe it but yealink firmware cannot recognize spaces between numbers. So phone number «044 555 55 55» in the local phone book can't be recognized, only «0445555555» works. Phone numbers with additional country code, like «+41445555555» does not work either. So please, dear software developers from yealink, for next firmware, improve the recognazion of phone numbers: https://en.wikipedia.org/wiki/National_c...ne_numbers

Thank you for the effort.