[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48G v73.0.50 - "%NULL%" showing for values
Author Message
rfrantik@rfcinc.com Offline
Junior Member
**

Posts: 31
Joined: Jan 2013
Reputation: 0
Post: #1
T48G v73.0.50 - "%NULL%" showing for values
T48G v73.0.50 - "%NULL%" showing for values

We have updated several of our T48G phones to the new v35.73.0.50 firmware. After the upgrade runs we find that many parameters that had blank values, now show as "%NULL%".

This is especially annoying for values that are actually shown on the display. If you have a BLF for x101 but don't put a LABEL on it you get "%NULL%".

We also program several line keys on our phones... so that if Line 1 is extension 101, it would actually be on LineKey.1, LineKey.2 & LineKey.3... both buttons 2 & 3 now display as "%NULL%". Prior to the upgrade, they showed the extension number, 101.

Is this a known issue? I will upload a screen capture from the Web GUI showing the DSS Keys with "%NULL%".

I do understand that %NULL% or !NULL! are intended for DEFAULT values in auto-config. But I've never seen them show in the GUI or on the LCD before.

Thanks


Attached File(s) Thumbnail(s)
   
04-04-2015 03:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T48G v73.0.50 - "%NULL%" showing for values - rfrantik@rfcinc.com - 04-04-2015 03:53 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G Microphone sensitivity ggstone 1 11,955 11-19-2016 08:23 AM
Last Post: Karl_Yealink
  Where's SMS support for T48G jayw654 12 50,183 12-30-2015 04:52 AM
Last Post: MJTEL
  T48G w/35.73.0.16 Action URL odd behavior njackson 1 10,733 11-13-2014 03:21 PM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication