Autoprovision to include OpenVPN Configuration

[Michael_Yealink]

hi Matt

would you mind upgrade to the newest firmware and test again :

http://download.support.yealink.com/down...1.0.20.zip

auto provision sentence :

static.network.vpn_enable =1
static.openvpn.url =

if all the above solution can't solve your issue, please provide us the trace file for future analysis,trace file including pcap file, config bin and syslog file , we need pcap file to check the communication of phone and server side , we need syslog file to know what happened to phone side , and we need config file to check if any configuration is missed, so we need three of them provide at one time.

as the phone will reboot , then it is advised to use a wireshark tool to get the pcap file , for how to download the tool and use it , please refer to the link below :
http://forum.yealink.com/forum/showthread.php?tid=15529

for the syslog, please export it to server side , before phone reboot , you can refer to the guide download from below link :
http://forum.yealink.com/forum/showthread.php?tid=15529

for the config.bin file , please refer to the FAQ below :
http://forum.yealink.com/forum/showthread.php?tid=1319

after you collect all the three files, just send them to me ASAP

let me know if any question

TKS & BR

Michael