Push XML on T38G

[ruffle]

Hi,

I'm trying to use push XML on a T38G. Pushing a YealinkIPPhoneTextScreen works fine but pushing a YealinkIPPhoneImageScreen doesn't

The XML I'm sending is:

<?xml version="1.0" encoding="UTF-8"?>
<YealinkiPPhoneImageScreen Beep="no" mode="fullscreen">
<Image>
http://192.168.1.63/axis-cgi/jpg/image.cgi
</Image>
</YealinkiPPhoneImageScreen>

The phone says 'Load Image please wait", the screen shows the line buttons on the right and just 'Exit' on the bottom line with a different background to normal. There's no image displayed though

If I use the exact same xml in a XML Browser DSS key the image is displayed correctly in fullscreen mode.

The push XML is being sent by a php script copied from the Yealink manual and as I said, works with a TextScreen.

The phone's running version 38.70.23.13

Any ideas?

Also... can one push or pull images in a loop? On the Snom 870's we've got, the idle screen shows 1 second snapshots of the entrance camera by simply pulling the image, waiting 1 second and pulling the image again and I'd like to do this on the Yealink T38G. Can this be done?