[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Protection against SIP vicious on wp52 and above
Author Message
pgtipicall Offline
Junior Member
**

Posts: 2
Joined: May 2014
Reputation: 0
Post: #7
RE: Protection against SIP vicious on wp52 and above
(02-16-2015 04:47 PM)saulgoodwin Wrote:  Hi kids,

Just a quick note.
In the latest Yealink Firmware there is an option Accept Sip Trust Server Only. By default it is set to Diabled.
Try changing it to Enabled.
You can find the option under Accounts -> Advanced.
It is at the very bottom of the list.

Tested on T20, T21, T26.

Hope that helps.

So I installed a SIP Vicious on a Raspberry Pi and ran a scan on our local network and discovered all Yealink phones, sent a blank invite to a device and it rang.

Easy when you are in the internal network, my colleague changed a setting on his phone and it now no longer rings.

Surely the issue here is that the device connecting the phones to the service is not secure? If it's locked down to a specific IP then it should not be a problem?

Thanks
Paul
02-17-2015 07:30 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Protection against SIP vicious on wp52 and above - pgtipicall - 02-17-2015 07:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication