T21

[Coco_Yealink]

Hello TaNTal,

Do you want to achieve that the phone will reboot after downloading the cfg file,right ?
If my understanding is right, then you can set below syntax in your common.cfg

auto_provision.reboot_force.enable=1
Description:
It enables or disables the IP phone to reboot after auto provisioning even though there is no specific configuration requiring reboot in configuration files.
0-Disabled
1-Enabled
The default value is 0.
Note: It works only for the current auto provisioning process. If you want the IP phone to reboot after every auto provisioning process, the parameter must be always contained in the configuration file and set to 1.