[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
feature on/off code
Author Message
Offline
Junior Member
**

Posts: 16
Joined: Jul 2014
Reputation: 0
Post: #1
feature on/off code
Hello,

In my opinion it starts to be a bit confusing to work with phone menu.
I was doing some tests with V73, but this menus already exist in v72.
I had configured on code and off code to anonymous call in T42G, I must go to Menu->features-> Anonymous call (in my opinion this should be in 3rd or 4th place not in 7th it's more used than the others).
But my question is not related with this.
When user enters anonymous call menu and chose the right line number the 2nd menu is anonymous call enabled/disabled. I was expecting that for the user it should be simple as enable or disable and save status does not matter what type of configuration is used (most of end users are nor aware of that).
From the tests I did, end user must know those configuration because our Broadsoft does not allow to originate a call as anonymous, so feature must be activated previously on platform using on code but instead of use enable/disable feature it must use send code.

Why not to keep it simple and permit all this configuration in background ( using config files or WebUI) but on the phone is just enable/disable?
10-13-2014 10:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
feature on/off code - - 10-13-2014 10:28 PM
RE: feature on/off code - James_Yealink - 10-14-2014, 04:13 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43U using L2TP VPN feature kaausc 0 804 06-22-2023 02:58 AM
Last Post: kaausc
  Does T4XU supports DD Phone Feature? kevinschlemmer 0 1,317 12-06-2022 10:48 PM
Last Post: kevinschlemmer
  Feature Request T46G - Return to page 1 imfloridaguy 4 11,841 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  Feature request - X header, disable missed call DarrenWilliams 0 3,595 10-14-2020 02:52 PM
Last Post: DarrenWilliams
  Local and Remote phonebooks pause and code (conference bridges) AndyInNJ 0 3,089 04-03-2020 06:02 PM
Last Post: AndyInNJ
  T41P-Call Forward Off Code don't work ?? flgh 2 6,781 03-05-2020 03:33 PM
Last Post: jolouis
  Speed dial Key adds pickup code when it shouldn't chrischevy 1 5,240 12-10-2019 03:14 PM
Last Post: JaredBusch
  T46G Forward off code sends code and Fwd to Number dwooster 3 7,744 12-18-2018 09:36 PM
Last Post: dwooster
  custom ringtone with new BLF feature Chris Barron 0 4,479 11-07-2018 01:59 PM
Last Post: Chris Barron
Sad T48 S BLF Code Jorge Luis 0 3,074 03-26-2018 08:30 PM
Last Post: Jorge Luis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication