[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Converting to Auto Provisioning
Author Message
Axion Communications Offline
Junior Member
**

Posts: 16
Joined: Feb 2013
Reputation: 1
Post: #3
RE: Converting to Auto Provisioning
(02-20-2013 06:19 PM)Mauro Wrote:  AFAIK, autoprovisioning overrides only the settings that exist in the provisioning file. If you add them to your provisioning file, they should override those already existing on the phone; if some sections are missing in the provisioning file, they will not be modified on the phone.
I think however there are some settings that you cannot set at all by autoprovisioning, but only through web gui or directly on the phone (I think once I found a Yealink document with a table indicating which features is possible to configure through the three modes... take a look to phone support page on main site).

To have the phones start from "clean", you may tell people to hold "ok" button for 10 seconds, then press it again when the phone asks for "factory reset?". This way, all settings should return to their defaults, also those that cannot be set through autoprovisioning. Then the phone will download and apply the autoprovisioning settings.

Thank you so much. That was what I was expecting, but that is not what's happening. Here are the exact steps we're following. This issue is happening with both the T26's (firmware 6.70.0.130) and T38's (firmware 38.70.0.115).

Take a phone that has been manually provisioned then plug it into a network that has auto provisioning working. I can see in the ftp server logs that the phones download the configuration files, but the phone only updates values that were not manually specified.

If you take the same phone, reset it to default, then plug it into the network then it auto provisions correctly. This is an issue for use because we have dozens of remote locations and home users that don't have access to a local tftp server.

We need to be able to change phone settings without requiring the user to reset the phone, and then manually entering the auto provisioning information. Is that possible?
02-21-2013 08:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Converting to Auto Provisioning - jtcary - 02-20-2013, 07:55 AM
RE: Converting to Auto Provisioning - jtcary - 02-21-2013 08:12 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 1,962 05-21-2024 01:23 PM
Last Post: rlaager
  Auto Provision Wall Paper Stopped Working TRP Tech 5 12,284 02-19-2024 12:02 AM
Last Post: jamesalan
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 3,009 10-12-2023 05:49 PM
Last Post: Andi_Dee
  How to disable Voicemail from .cfg in auto provisioning file? boniakowski 2 3,048 09-19-2023 12:03 AM
Last Post: boniakowski
  VPN Changes Do Not Get Auto-Provisioned joe1st 3 4,837 08-08-2023 12:35 AM
Last Post: cecilberge
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 7,919 04-12-2023 05:32 PM
Last Post: aaronmedina
  account.X provisioning vieri 7 8,706 02-10-2023 07:02 PM
Last Post: vieri
  Yealink T54W Auto Provision not working h.cmc 1 5,533 12-09-2022 08:31 PM
Last Post: complex1
  T46U Not Contacting Provisioning Server 88fingerslukee 0 2,888 09-06-2022 11:43 PM
Last Post: 88fingerslukee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 7,168 08-30-2022 06:28 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication