[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Automated mass T46 backup system
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: Automated mass T46 backup system
Hi bsanders&timalex&rlsabin,

The requirement what you mentioned is to backup the configuration and upload to server when configuration changes ,right?
If yes,maybe you can refer to below syntax in AutoP file:

################################################################################​#######
## Autoprovision ##
################################################################################​#######
### It enables or disables the phone to synchronize personalized configuration settings with the auto provisioning server.
### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface are saved in the MAC-local.cfg file on the phone,
### and then the phone will upload the MAC-local.cfg file to the provisioning server. During auto provisioning, the phone requests to download the MAC- local.cfg file on the provisioning server.
### 0-Disabled, 1-Enabled. The default value is 0.
auto_provision.custom.sync =

### It enables or disables the phone to protect personalized configuration settings even after auto provisioning.
### If it is set to 1 (Enabled), personalized configuration settings via web/phone user interface will be protected and remained after auto provisioning.
### 0-Disabled, 1-Enabled. The default value is 0.
auto_provision.custom.protect =
auto_provision.custom.upload_method =

You can also lookup the AutoP guide for detail.
But the function only support in T2x with x.72.0.30 ,as for T4x,we will add this function in V73.The firmware V73 will be released in Q3.

thanks.
(This post was last modified: 08-12-2014 03:34 PM by Yealink Support.)
08-12-2014 08:36 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Automated mass T46 backup system - Yealink Support - 08-12-2014 08:36 AM
RE: Automated mass T46 backup system - CWR - 06-12-2017, 09:35 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Connect Yealink T46U to FreePBX system via Synology Site to Site VPN TF2023 0 750 10-10-2023 11:48 PM
Last Post: TF2023
  Mass Factory Reset stratos 3 8,478 05-16-2019 03:09 PM
Last Post: jolouis
Exclamation Local Contacts Backup Not Working Garan 1 6,440 08-28-2017 04:25 PM
Last Post: complex1
  Backup outbound proxy server don`t work for T4x,T2x tommy 1 6,071 06-02-2016 05:11 AM
Last Post: Yealink_Michael
  Mass deletion Dan Steely 8 16,029 01-19-2016 05:49 AM
Last Post: Karl_Yealink
  BLF Backup Server T46G jrosaso 2 7,442 06-13-2015 02:23 AM
Last Post: jrosaso
  Mass config change with hosted VOIP provider charper 3 14,047 04-07-2015 08:50 PM
Last Post: Yealink_Peter

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication