Log in

WBryington · 07-12-2014 07:17 PM

I am busy setting up BLF for a number of extensions on a EXP39 connection to a T28 phone. This is working well - I can see the extensions going busy or ringing etc. Smile

I have a problem when a phone is not registered (or turned off). Confused

The LED is still showing as green (ie. idle).

I have reviewed the auto-provision guide at Yealink Autoprovision Guide at the LED settings on page 220... but none of the options actually match my requirement.

Is the following setup possible?

- Solid green: The monitored user is idle.
- Fast flashing green (200ms): The monitored user receives an incoming call.
Slow flashing green (500ms): The monitored user is dialing, talking or on hold.
- Slow flashing green (1s): The call is parked against the monitored user’s phone number.
Off: The monitored user does not exist or is not registered

I am on v2.72.0.30 firmware on the phone.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Remote Extensions	STDSupport	1	1,829	12-09-2022 11:42 PM Last Post: complex1
	T23G extensions registration	Edie	1	5,758	12-18-2017 07:42 PM Last Post: jolouis
	Disable full-screen display on T48S when other extensions are being called	TStaudte	0	5,855	07-21-2017 05:08 AM Last Post: TStaudte
	T23G - Setup to view incoming calls of other extensions	apant	1	7,594	09-13-2016 12:53 AM Last Post: apant
	Incoming calls are not showing up on the right extensions	Sdisnie	3	10,946	11-21-2015 02:54 AM Last Post: Yealink_Michael
	Other extensions voicemail from DSS	rapix	1	7,592	11-06-2015 02:41 AM Last Post: CWR
	Dialplan for quick dialing extensions	lonvoice	1	6,205	10-22-2015 11:44 PM Last Post: lonvoice
	Unable to ring extensions	Arismac	1	8,185	09-01-2014 10:53 AM Last Post: Wilson_Yealink

Threaded Mode \| Linear Mode BLF and unregistered extensions
Author	Message